Engineering selection and product sourcing
Servotecnica
Servotecnica SpA is an Italian motion control company founded in 1980 and based at Via E. Majorana 4, Nova Milanese, near Milan, on +39 0362 4921 and info@servotecnica.com. It designs its own SVTS slip rings and lists McLennan Servo Supplies in Surrey as its UK partner.
Pricing and availability
Source Servotecnica parts or compare a suitable alternative
Need Servotecnica parts, a replacement or a suitable alternative? Send us a part number, or tell us what the machine needs to do. Our UK engineers will come back with the right product, pricing, lead time and delivery, whether that is the original part, a checked alternative or a complete axis.
- Original parts or a checked alternative
- Pricing, lead time and delivery in one reply
- Components, complete axes and ongoing support
No obligation. Add what you know and an engineer will help with the rest. Prefer to configure it? Build a specification.
Spec builder
Specify Servotecnica parts or an equivalent
Select every part you need and answer the questions an applications engineer would ask. Our engineers use your specification to come back with the right products, pricing and lead times. You see your summary before we ask for any details.
Already know the part number? Send it to us directly.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
| Legal name | Servotecnica SpA |
|---|---|
| Founded | 1980 |
| Owner / parent | Servotecnica SpA |
| Headquarters | 20834 Nova Milanese (MB), Italy |
| Website | servotecnica.com/en |
Manufacturer information and published contact details
Servotecnica contact details
Head office
Via E. Majorana 420834 Nova Milanese (MB)
Italy
Telephone +39 0362 4921
Email info@servotecnica.com
Website servotecnica.com/en
UK partner: McLennan Servo Supplies Ltd
Unit 1, The Royston Centre, Lynchford RoadAsh Vale, Surrey GU12 5PQ
United Kingdom
Telephone +44 1252 531444
Web mclennan.co.uk
Germany: Servotecnica GmbH
Kelsterbacher Strasse 2065479 Raunheim
Germany
Telephone +49 6142 7936039
Email info@servotecnica.de
Contact details as published by Servotecnica SpA, checked 2026-10-30. Specify Motion is not affiliated with Servotecnica SpA.
Servotecnica product lines
| SVTS slip rings | Capsule, Faston, through-bore, ruggedised, open and flat slip rings |
|---|---|
| Rotary joints | Rotary joints and slip ring assemblies combining power, signals and fluids |
| Servomotors | Brushless servomotors |
| Micromotors | Small motors launched in 2018 |
| Encoders and inertial sensors | Position feedback and motion sensing |
| Servo drives | Drive electronics for servo axes |
| Precision gearboxes | Gearing for servo and motion applications |
Who Servotecnica is
Servotecnica SpA is an Italian motion control company based in Nova Milanese, just north of Milan. It combines its own products, most visibly the SVTS range of slip rings, with a portfolio of motion components and engineering services for machine builders. Servotecnica is a trademark of its owner.
For UK engineers the brand matters mainly for slip rings: compact capsules for automation and cameras, through-bore rings for rotary tables and machinery, ruggedised stainless designs for washdown, and open frameless rings for high current.
History and ownership
Servotecnica dates its foundation to 1980 and describes itself as having more than 40 years of experience in motion control. Its published timeline shows how the product range built up:
- 1981: an advanced servomotor and PWM servo drive.
- 1984: direct motors.
- 1987: motion control.
- 1990: rotary joints.
- 1994: soft motion.
- 1995: torque motors.
- 2001: new headquarters.
- 2005: launch of Servotecnica’s own slip rings and servomotors.
- 2012: development of the European market.
- 2016: Servotecnica GmbH founded in Germany.
- 2018: launch of Servotecnica micromotors.
- 2020: Servotecnica USA founded.
Servotecnica SpA is an Italian joint-stock company (VAT IT 00807880968). Its website does not publish shareholders or a parent group, so this profile does not state an owner beyond the company itself. Alongside its own products, Servotecnica represents other manufacturers in Italy; Curtiss-Wright, for example, lists Servotecnica as its Italian representative for Exlar actuators.
Slip ring portfolio
The SVTS slip ring families we list are:
- SVTS A: capsule slip rings from 12 to 25 mm diameter, with optional IP65 sealing and fluid or fieldbus combinations.
- SVTS A Ethernet: capsules carrying 100BaseT or 1000BaseT Ethernet with signal circuits.
- SVTS A05 high current: a 22 mm capsule with power circuits up to 20 A.
- SVTS A06 RF: an RF capsule passing coaxial signals for HD video and CCTV.
- SVTS B: compact slip rings with Faston terminals for low circuit counts.
- SVTS C: through-bore slip rings from 3 to 100 mm bore with options for pneumatic passages.
- SVTS C Ethernet: through-bore rings integrating Gigabit or Fast Ethernet with power and signals.
- SVTS D: ruggedised slip rings in stainless steel housings, IP65 as standard, for washdown and harsh sites.
- SVTS E: open, frameless high-current slip rings.
- SVTS F: a flat slip ring with a 40 mm through-bore.
Servotecnica’s wider catalogue includes rotary joints, micromotors, servomotors, encoders and inertial sensors, servo drives and precision gearboxes, sold under the Servotecnica and Flux brands. For slip ring selection, see our slip rings hub, the capsule slip rings and through-bore slip rings pages, and the guide to Ethernet through slip rings.
What Servotecnica is known for technically
Servotecnica stresses customisation. Most SVTS families are described as customisable, with high data rates and IP65 sealing on the capsule, through-bore and ruggedised ranges. Combining power, signals, Ethernet, RF and pneumatic passages in one unit lets a designer replace several rotary components with one, which shortens the stack-up on a rotary table or camera head.
Because most SVTS families can be customised, the part number on an installed ring may describe a custom build rather than a catalogue item. Before asking for a replacement or equivalent, record the label details, measure the bore, body and mounting, count the circuits by function (power, signal, Ethernet, coax, air) and note the connector types at both ends.
When comparing an SVTS ring with an alternative, check circuit count and current per ring, voltage rating, bore or shaft size, maximum speed, the data protocol and bandwidth, IP rating, temperature range, and mounting and anti-rotation details.
Industries served
Servotecnica describes itself as an automation and mechatronics company, and the SVTS options show where its slip rings go: RF capsules for CCTV and HD video heads, Ethernet rings for networked rotary machinery, stainless IP65 units for food and washdown areas, and high-current open rings for heavier rotating equipment. Typical machines include rotary indexing tables, packaging and labelling carousels, camera pan-tilt units, robot wrists and test equipment.
Global and UK presence
Servotecnica sells from its Italian head office, its German subsidiary in Raunheim and Servotecnica USA, and through partners. Its contacts page lists partners in Belgium and France, Israel, South Korea, Spain, Scandinavia, Switzerland and the United Kingdom. The UK partner is McLennan Servo Supplies Ltd at Ash Vale, Surrey.
Specify Motion and Servotecnica
Specify Motion is independent of Servotecnica and is not a distributor for it. We can help you source Servotecnica slip rings where available, or propose equivalents from our supply network that meet the same published specification, confirmed by an engineer. See our page on alternatives to Servotecnica slip rings or use find a replacement with your current part number.
Contact details at a glance
- Head office: Servotecnica SpA, Via E. Majorana 4, 20834 Nova Milanese (MB), Italy
- Phone: +39 0362 4921
- Email: info@servotecnica.com
- UK partner: McLennan Servo Supplies Ltd, +44 1252 531444
- Website: servotecnica.com
Contact details were taken from Servotecnica’s own website on 30 October 2026.
Servotecnica history: key dates
- 1980Servotecnica founded
- 1981Advanced servomotor and PWM servo drive
- 1984Direct motors added
- 1987Motion control
- 1990Rotary joints added to the range
- 1995Torque motors
- 2001New headquarters
- 2005Launch of Servotecnica's own slip rings and servomotors
- 2016Servotecnica GmbH founded in Germany
- 2020Servotecnica USA founded
Servotecnica slip rings
SVTS A (A 01-A 07)
Capsule slip rings from 12 to 25 mm diameter with up to 56 circuits, optional IP65 sealing and fluid or fieldbus combinations.
SVTS A 03 / A 04 Ethernet
Capsule slip rings carrying 100BaseT or 1000BaseT Ethernet alongside 2 A signal circuits.
SVTS A 05
High-current 22 mm capsule with up to three power circuits rated up to 20 A.
SVTS A 06
RF capsule slip ring passing coaxial signals up to 3 GHz for HD video and CCTV, with up to 24 signals.
SVTS B (B 01-B 04)
Compact slip rings with Faston terminals for low circuit counts, offering power rings up to 20 A and long life.
SVTS C (C 01-C 11)
Through-bore slip rings from 3 mm to 100 mm bore with up to 96 circuits, power rings to 20 A at 600 V and optional pneumatic passages.
SVTS C 04 / C 05 / C 06 Ethernet
Through-bore slip rings integrating 100BaseT or 1000BaseT Ethernet with power and signal rings in 25.4 to 50 mm bores.
SVTS D (D 01-D 02)
Ruggedised slip rings in stainless steel housings, IP65 as standard, for washdown and harsh industrial environments.
SVTS E (E 01-E 04)
Open, frameless high-current slip rings with three power circuits of 20, 40 or 60 A through bores of 25.4 to 60 mm.
SVTS F (F 01)
Flat slip ring with a 40 mm through bore and 40 mm height, derived from the C Series, carrying up to 20 circuits.
Engineer support
Ask about Servotecnica parts or equivalents
Tell us the part or application, quantity and timing. Our UK engineers will come back with the right product, pricing, lead time and delivery.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
How it works
From enquiry to delivery
Send a part number or describe the application. Our engineers take it from there: the right product, a clear quotation, and delivery and support arranged.
- 01Tell us what you needSend a part number, or configure the application, quantities and timing.
- 02An engineer reviews itWe check the specification and find the original part, a checked equivalent or a complete axis.
- 03Receive your quotationProducts, pricing, lead time and compatibility notes in one reply.
- 04Order and deliveryWhen you are happy, the order is placed and delivery and after-sales support are arranged.