RF rotary joint
Servotecnica SVTS A 06
RF capsule slip ring passing coaxial signals up to 3 GHz for HD video and CCTV, with up to 24 signals.
Key specifications
| Circuits (max) | 24 |
|---|---|
| Voltage (max) | 240 V |
| Speed (max) | 100 rpm |
| Outer diameter | 22–22 mm |
| Ingress protection | IP51 |
| Temperature | -20–80 °C |
| Data / bus | RF up to 3 GHz, HD video 1080p / 3G-SDI |
| Rated life (revolutions) | 3,000,000 |
Summarised in our own words from Servotecnica SpA's published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1
Notes on this data
Connectors MMCX/SMA/SMB/MCX/BNC; cables RG174/RG178/RG179/RG316. Life 3x10^6 rev.
Specify Motion is not affiliated with Servotecnica SpA. Servotecnica and SVTS A 06 are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Alternatives that meet or exceed these figures
Engineers often come to us with a Servotecnica part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These 2 series from our supply network are the closest match on published figures.
RF rotary joints that carry microwave signals across rotation for antennas and radar, with one to five channels. Single-channel models run to 50 GHz.
| Published maximum | SVTS A 06 | RR Series Radio Frequency Rotary Joint |
|---|---|---|
| Circuits | 24 | — |
| Speed | 100 rpm | 500 rpm meets or exceeds |
| Voltage | 240 V | — |
Electrical slip rings with up to five built-in RF channels for radar and satellite antennas, grouped in the catalogue with cable-reel slip rings for cranes and masts.
| Published maximum | SVTS A 06 | RF Integrated Electrical Slip Ring / C… |
|---|---|---|
| Circuits | 24 | — |
| Current per circuit | — | 50 A |
| Speed | 100 rpm | 300 rpm meets or exceeds |
| Voltage | 240 V | — |
| Bore | — | 275 mm |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Spec builder
Specify what you need instead of SVTS A 06
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Servotecnica SVTS A 06: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.