Optical incremental encoder
Hengstler ICURO RI58 optical incremental encoder
Universal 58 mm incremental encoder family with up to 10,000 lines (up to 40,000 steps with edge evaluation), IP67 and many flange and connector options; hollow-shaft RI58-H takes shafts up to 12 mm and the RI58-T runs to 100 °C.
Need this part, a replacement or a complete package? Our experienced UK engineering team helps you select, source and obtain the right products, with pricing, delivery coordination and after-sales support.
UK engineering team · Product sourcing · Supply support
Get pricing, sourcing and replacement support
Need Hengstler parts, a replacement or another suitable option? Send your part number or describe what the machine needs to do. We connect your requirement with experienced UK engineering and procurement support to help you get the right products, pricing and supply options. Your matched provider can take the enquiry through quotation and ordering to delivery and after-sales support.
- Source original parts or assess suitable alternatives
- Get pricing, lead times and a defined supply proposal
- One enquiry for components, complete axes and ongoing support
No obligation to buy. Choose the quick form below or use the full configurator on this page. Add what you know; an engineer can help with the details.
Need help choosing? Build a specification →Spec builder
Specify what you need instead of ICURO RI58
Select the products and performance you need. Our UK engineering team can use your specification to help source the right components, pricing and supply options. See your summary before adding contact details.
Already know the part number? Use the quick enquiry form. You can configure a requirement below without registering.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
Key specifications
| Bore (max) | 12 mm |
|---|---|
| Ingress protection | up to IP67 |
| Temperature (max) | 100 °C |
| Supply | 3–38 V wide-range option (on request) |
| Ppr max | 10,000 |
| Counts max | 40,000 |
| Temp note | 100 °C for the RI 58-T; RI58-H rated -10 to +70 °C |
| Shock | RI58-H: 100 g (1,000 m/s²) for 6 ms |
| Housing | 58 |
Summarised in our own words from Ralliant Corporation (Hengstler GmbH, part of Hengstler-Dynapar)'s published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1 · Source 2 · Source 3
Notes on this data
RI58-H uses Hengstler's isolated opto-ASIC scanning (news page). Explosion-protected applications are referred to the RX 70-71 range.
Specify Motion is not affiliated with Ralliant Corporation (Hengstler GmbH, part of Hengstler-Dynapar). Hengstler and ICURO RI58 are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Engineer support
Speak to our engineers about your project
Our experienced engineers are on hand, ready to help with your project. Whether you need the Hengstler ICURO RI58 itself, help sourcing it, or a modified or custom design built around your load, speed and space, tell us what the machine has to do and we'll come back with the right option.
- Help sourcing ICURO RI58 and spares for installed machines
- Modified and custom designs when a catalogue part doesn't fit
- Complete axis: motor, drive, gearing and feedback matched together
Typical applications
What an optical incremental encoder is
An optical incremental encoder measures motion by shining light through or reflecting it from a disc or scale with fine graduations onto photodetectors. As the disc or scale moves, the encoder outputs two square-wave or sine-wave channels in quadrature, called A and B, plus an index pulse once per revolution or at reference marks. The counter in the drive or controller tracks position by counting edges from a home point. Optical encoders achieve very high resolution and accuracy.
When engineers choose an optical incremental encoder
Choose an optical incremental encoder for precise speed and position feedback where homing at power-up is acceptable, such as servo motors, stages and machine tools. They are widely compatible and cost effective. The trade-offs are contamination and power loss: dust, oil and condensation can obscure the optical path, and position is lost when power is removed. For harsh environments, magnetic or inductive encoders may suit better.
How to specify the Hengstler ICURO RI58
Send these with your enquiry and an engineer can confirm the right ICURO RI58 variant or an equivalent:
- Resolution (lines per revolution or µm)
- Output type: TTL, HTL or sin/cos
- Index or reference marks
- Shaft or hollow shaft size (mm)
- Maximum speed (rpm or m/s)
- Supply voltage (V)
- Environment and IP code
Common mistakes to avoid
- Choosing resolution above what the drive input can count
- Running long cables with TTL signals without line drivers
- Ignoring contamination in open optical designs
- Forgetting homing routines after power-up
Hengstler ICURO RI58: frequently asked questions
Can you help replace Hengstler ICURO RI58 or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including supply-network options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Hengstler ICURO RI58?
Universal 58 mm incremental encoder family with up to 10,000 lines (up to 40,000 steps with edge evaluation), IP67 and many flange and connector options; hollow-shaft RI58-H takes shafts up to 12 mm and the RI58-T runs to 100 °C. Published series figures include bore 12 mm, temperature 100 °C. It is made by Ralliant Corporation (Hengstler GmbH, part of Hengstler-Dynapar); Specify Motion can help source it or propose an equivalent.
Who makes the Hengstler ICURO RI58?
The Hengstler ICURO RI58 is made by Hengstler (Ralliant Corporation (Hengstler GmbH, part of Hengstler-Dynapar)) and is listed here for engineers comparing options. Specify Motion is not affiliated with Ralliant Corporation (Hengstler GmbH, part of Hengstler-Dynapar); brand names are used only to identify the product.
What is the bore of the Hengstler ICURO RI58?
The published series maximum bore is 12 mm. Individual models and sizes in the ICURO RI58 range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Hengstler ICURO RI58?
We can assess suitable replacement options. Our engineers can review the original model and propose options for your load, speed and environment. An engineer confirms the fit against your application before recommending anything.
What is quadrature output on an incremental encoder?
Quadrature output provides two channels, A and B, offset by 90 electrical degrees. Comparing which leads gives direction, and counting edges on both gives four times the line count in resolution. An index pulse marks a reference position for homing.
What is the difference between TTL and HTL outputs?
TTL outputs use a 5 V differential signal, which suits high frequencies and is commonly used with line drivers. HTL outputs use a higher voltage swing, typically matched to a 10 to 30 V supply, which improves noise immunity on long cables. Match the output type to the drive or controller input.
Further reading: Absolute vs incremental encoders · How to select an encoder · Encoders and feedback
Other optical incremental encoder series
Engineer support
Our engineers are ready to help with your project
Tell us about your project and how you use the Hengstler ICURO RI58: the load, speed, duty and environment. An experienced engineer will review it and reply, normally within one working day.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
UK engineering input · A route to buying the right products
From your enquiry to products, delivery and support
Specify Motion helps turn a part number or application into a purchasing enquiry. We provide recommendations and connect your requirement with a relevant engineering or procurement provider for product selection, pricing, sourcing and supply.
- Tell us what you needSend a code or configure the application, quantities and timing.
- Reach a relevant providerAccess experienced UK engineering input and a suitable procurement route.
- Review the quotationYour provider confirms the products, price, compatibility checks and supply terms.
- Order with delivery and support agreedConfirm delivery, warranty and after-sales arrangements with the contracting provider.
You choose whether to proceed with the provider and should carry out your own checks. Website and introduction service terms.