Housed direct-drive motor
Baumüller DST2 high-torque motors
Housed synchronous high-torque motors for direct drive in five sizes (135 to 400), nominal torque up to 18,600 Nm and peak up to 31,600 Nm, up to 530 kW, water- or oil-cooled, IP54.
Need this part, a replacement or a complete package? Our experienced UK engineering team helps you select, source and obtain the right products, with pricing, delivery coordination and after-sales support.
Pricing and availability
Get pricing, sourcing and replacement support
Need Baumüller parts, a replacement or a suitable alternative? Send us a part number, or tell us what the machine needs to do. Our UK engineers will come back with the right product, pricing, lead time and delivery, whether that is the original part, a checked alternative or a complete axis.
- Original parts or a checked alternative
- Pricing, lead time and delivery in one reply
- Components, complete axes and ongoing support
No obligation. Add what you know and an engineer will help with the rest. Prefer to configure it? Build a specification.
Spec builder
Specify what you need instead of DST2 high-torque motors
Select every part you need and answer the questions an applications engineer would ask. Our engineers use your specification to come back with the right products, pricing and lead times. You see your summary before we ask for any details.
Already know the part number? Send it to us directly.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
Key specifications
| Ingress protection | IP54 |
|---|---|
| Rated torque (max) | 18,600 Nm |
| Peak torque (max) | 31,600 Nm |
| Speed (max) | 2,000 rpm |
| Power (max) | 530,000 W |
| Sizes | 135, 200, 260, 315, 400 |
| Cooling | water or oil |
Summarised in our own words from Baumüller Nürnberg GmbH (family-run Baumüller Group)'s published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1 · Source 2
Notes on this data
Sizes 315 and 400 have Lloyd's Register certification for shipbuilding (2015 milestone).
Specify Motion is not affiliated with Baumüller Nürnberg GmbH (family-run Baumüller Group). Baumüller and DST2 high-torque motors are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Baumüller DST2 high-torque motors replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original Baumüller part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
Housed iron-core direct drive motors with larger through-holes than ADR-A, 110-220 mm frames, optical encoder feedback.
| Published maximum | DST2 high-torque motors | ADR-B |
|---|---|---|
| Peak torque | 31,600 Nm | — |
| Speed | 2,000 rpm | 2,000 rpm meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What a housed direct-drive motor is
A housed direct-drive motor is a high-pole-count permanent-magnet torque motor supplied in a complete housing with its own bearings, typically a precision cross-roller or similar bearing, and a high-resolution encoder. The load bolts directly onto the rotor face or shaft, with no gearbox or belt between motor and load. Many designs have a large hollow centre. They are run by a servo drive and provide high torque at low speed with very high stiffness and accuracy.
When engineers choose a housed direct-drive motor
Choose a housed direct-drive motor for rotary tables, indexers and turntables that need high accuracy, fast indexing and no backlash, without the integration effort of a frameless motor. It is ready to mount. The trade-offs are cost and size: direct drive needs a large motor for high torque, and the bearing and encoder are set by the range. Where torque needs are high and accuracy moderate, a servo with a precision gearbox may be cheaper.
How to specify the Baumüller DST2 high-torque motors
Send these with your enquiry and an engineer can confirm the right DST2 high-torque motors variant or an equivalent:
- Continuous and peak torque (Nm)
- Speed (rpm)
- Load inertia and moment load (kgm², Nm)
- Axial and radial load capacity (N)
- Encoder type and resolution
- Through-hole diameter (mm)
- Bus voltage and drive compatibility
Common mistakes to avoid
- Ignoring moment loads from offset tooling
- Mismatching encoder interface and drive
- Overlooking thermal effects on accuracy
- Expecting high torque without a large frame
Baumüller DST2 high-torque motors: frequently asked questions
Can you help replace Baumüller DST2 high-torque motors or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including supply-network options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Baumüller DST2 high-torque motors?
Housed synchronous high-torque motors for direct drive in five sizes (135 to 400), nominal torque up to 18,600 Nm and peak up to 31,600 Nm, up to 530 kW, water- or oil-cooled, IP54. Published series figures include rated torque 18,600 Nm, peak torque 31,600 Nm, speed 2,000 rpm, power 530,000 W. It is made by Baumüller Nürnberg GmbH (family-run Baumüller Group); Specify Motion can help source it or propose an equivalent.
Who makes the Baumüller DST2 high-torque motors?
The Baumüller DST2 high-torque motors is made by Baumüller (Baumüller Nürnberg GmbH (family-run Baumüller Group)) and is listed here for engineers comparing options. Specify Motion is not affiliated with Baumüller Nürnberg GmbH (family-run Baumüller Group); brand names are used only to identify the product.
What is the rated torque of the Baumüller DST2 high-torque motors?
The published series maximum rated torque is 18,600 Nm. Individual models and sizes in the DST2 high-torque motors range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Baumüller DST2 high-torque motors?
We can assess suitable replacement options. On published figures, Akribis Systems ADR-B is options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
When should I choose a direct-drive rotary table instead of a geared one?
Choose direct drive when you need high accuracy, fast settling, no backlash and low maintenance, especially for indexing and inspection. Choose a geared solution where torque requirements are high and cost must be controlled. Direct-drive motors are larger for the same torque.
Do housed direct-drive motors need a brake?
Not always. Horizontal tables often hold position under servo control. Vertical axes, unbalanced loads or safety requirements may need a brake or clamp. The machine's risk assessment determines whether a holding brake or clamp is required, and brake or clamp options vary between ranges, so confirm availability early in the design.
Further reading: How to select a frameless torque motor · Frameless and torque motors
Other housed direct-drive motor series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Baumüller DST2 high-torque motors: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
How it works
From enquiry to delivery
Send a part number or describe the application. Our engineers take it from there: the right product, a clear quotation, and delivery and support arranged.
- 01Tell us what you needSend a part number, or configure the application, quantities and timing.
- 02An engineer reviews itWe check the specification and find the original part, a checked equivalent or a complete axis.
- 03Receive your quotationProducts, pricing, lead time and compatibility notes in one reply.
- 04Order and deliveryWhen you are happy, the order is placed and delivery and after-sales support are arranged.