Rotary unions and hybrid joints
Deublin Type C steam joints
Ferrous steam joint for elevated steam pressures of 10 bar and temperatures up to 406 °F (about 208 °C), used with stationary or rotating siphons on drying cylinders.
Need this part, a replacement or a complete package? Our experienced UK engineering team helps you select, source and obtain the right products, with pricing, delivery coordination and after-sales support.
UK engineering team · Product sourcing · Supply support
Get pricing, sourcing and replacement support
Need Deublin parts, a replacement or another suitable option? Send your part number or describe what the machine needs to do. We connect your requirement with experienced UK engineering and procurement support to help you get the right products, pricing and supply options. Your matched provider can take the enquiry through quotation and ordering to delivery and after-sales support.
- Source original parts or assess suitable alternatives
- Get pricing, lead times and a defined supply proposal
- One enquiry for components, complete axes and ongoing support
No obligation to buy. Choose the quick form below or use the full configurator on this page. Add what you know; an engineer can help with the details.
Need help choosing? Build a specification →Spec builder
Specify what you need instead of Type C steam joints
Select the products and performance you need. Our UK engineering team can use your specification to help source the right components, pricing and supply options. See your summary before adding contact details.
Already know the part number? Use the quick enquiry form. You can configure a requirement below without registering.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
Key specifications
| Temperature (max) | 208 °C |
|---|---|
| Pressure (max) | 1 MPa |
| Media | steam and condensate |
| Pressure note | 10 bar as published |
| Temp note | published as up to 406 °F |
Summarised in our own words from HOERBIGER Group's published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1
Specify Motion is not affiliated with HOERBIGER Group. Deublin and Type C steam joints are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Deublin Type C steam joints replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original Deublin part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
Combined units passing hundreds of electrical circuits plus up to 16 gas or liquid channels, with pressures of 10 MPa or more.
A rotary union that passes air, gases or fluids through rotating interfaces, optionally combined with electrical circuits in one unit. Size, ports and channel count are customised to the machine.
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What a rotary unions and hybrid joint is
A rotary union, also called a rotary joint or swivel, transfers fluids such as compressed air, vacuum, hydraulic oil, water or coolant from a fixed supply into a rotating shaft or table. A rotating shaft runs inside a stationary housing, and each fluid passage is isolated by seals between grooves, so several media can pass through one unit. Many designs combine with an electrical slip ring into one assembly, providing both fluid and electrical paths through continuous rotation.
When engineers choose a rotary unions and hybrid joint
Choose a rotary union when pneumatic grippers, vacuum cups, hydraulic clamps or cooling circuits sit on a rotating part. The alternative of hoses limits rotation to a few turns. The trade-offs are seal friction, leakage and wear: seal choice sets pressure, speed and media compatibility, and dry running damages some seals. Mixing vacuum and pressure in one unit needs suitable seals. Combining the union with a slip ring saves space but makes the assembly larger and more application-specific.
How to specify the Deublin Type C steam joints
Send these with your enquiry and an engineer can confirm the right Type C steam joints variant or an equivalent:
- Number of passages and the medium in each
- Pressure and vacuum levels (bar)
- Flow rate or port size (l/min, mm or BSP)
- Fluid temperature (°C) and compatibility
- Speed (rpm)
- Permitted leakage and drain or vent provision
- Electrical circuits if combined with a slip ring
Common mistakes to avoid
- Running a union designed for lubricated media on dry air or without flow
- Not providing a leak drain between media and the electrical section of a combined unit
- Applying side load from rigid pipework instead of using flexible hoses and a torque arm
- Ignoring pressure spikes from valve switching when choosing seals
Deublin Type C steam joints: frequently asked questions
Can you help replace Deublin Type C steam joints or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including supply-network options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Deublin Type C steam joints?
Ferrous steam joint for elevated steam pressures of 10 bar and temperatures up to 406 °F (about 208 °C), used with stationary or rotating siphons on drying cylinders. Published series figures include temperature 208 °C, pressure 1 MPa. It is made by HOERBIGER Group; Specify Motion can help source it or propose an equivalent.
Who makes the Deublin Type C steam joints?
The Deublin Type C steam joints is made by Deublin (HOERBIGER Group) and is listed here for engineers comparing options. Specify Motion is not affiliated with HOERBIGER Group; brand names are used only to identify the product.
What is the temperature of the Deublin Type C steam joints?
The published series maximum temperature is 208 °C. Individual models and sizes in the Type C steam joints range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Deublin Type C steam joints?
We can assess suitable replacement options. On published figures, Motion Control Products Pneumatic/Hydraulic Integrated Electrical Slip Ring and Motion Control Products QR Series Pneumatic/Hydraulic Rotary Joint are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
Can one rotary union pass air, vacuum and water at the same time?
Yes, multi-passage rotary unions isolate each medium in its own groove with seals between them. Each passage must be specified with its medium, pressure and flow, because seals that suit air may not suit water or vacuum. Leakage paths between passages and a drain for any seepage should be agreed with the supplier.
How is a rotary union combined with a slip ring?
A common layout puts the rotary union on the axis and the electrical slip ring around or beside it in a single assembly, so both fluids and electrical circuits pass through one rotating connection. The design must keep fluid away from the electrical rings, often with a drain chamber. Specify both parts together so the supplier can manage sealing, length and bearing loads.
Further reading: How to select a rotary union · How to select a slip ring · Slip rings
Other rotary unions and hybrid joints series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Deublin Type C steam joints: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
UK engineering input · A route to buying the right products
From your enquiry to products, delivery and support
Specify Motion helps turn a part number or application into a purchasing enquiry. We provide recommendations and connect your requirement with a relevant engineering or procurement provider for product selection, pricing, sourcing and supply.
- Tell us what you needSend a code or configure the application, quantities and timing.
- Reach a relevant providerAccess experienced UK engineering input and a suitable procurement route.
- Review the quotationYour provider confirms the products, price, compatibility checks and supply terms.
- Order with delivery and support agreedConfirm delivery, warranty and after-sales arrangements with the contracting provider.
You choose whether to proceed with the provider and should carry out your own checks. Website and introduction service terms.