Rotary unions and hybrid joints
SCHLEIFRING Media rotary joints
Single-channel rotary joints for air, vacuum and hydraulic fluid that can be combined with Schleifring slip rings.
Key specifications
| Speed (max) | 3,500 rpm |
|---|---|
| Channels | 1 |
| Pressure bar max | 70 |
Summarised in our own words from Schleifring GmbH's published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1
Notes on this data
1/4": hydraulic 70 bar, air 10 bar; 1/2": hydraulic 52 bar, air 10 bar. IP not stated.
Specify Motion is not affiliated with Schleifring GmbH. SCHLEIFRING and Media rotary joints are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Engineer support
Speak to our engineers about your project
Our experienced engineers are on hand, ready to help with your project. Whether you need the SCHLEIFRING Media rotary joints itself, help sourcing it, or a modified or custom design built around your load, speed and space, tell us what the machine has to do and we'll come back with the right option.
- Help sourcing Media rotary joints and spares for installed machines
- Modified and custom designs when a catalogue part doesn't fit
- Complete axis: motor, drive, gearing and feedback matched together
Other rotary unions and hybrid joints series
Spec builder
Specify what you need instead of Media rotary joints
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Our engineers are ready to help with your project
Tell us about your project and how you use the SCHLEIFRING Media rotary joints: the load, speed, duty and environment. An experienced engineer will review it and reply, normally within one working day.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.