Closed-loop stepper drive
Trinamic (Analog Devices) TMCM-1316 closed-loop stepper drive
Single-axis stepper controller/driver for closed-loop operation with an external encoder, using the TMC4361 and TMC5160: 10–30 V, up to 5.7 A RMS, RS485, USB and step/direction.
Need this part, a replacement or a complete package? Our experienced UK engineering team helps you select, source and obtain the right products, with pricing, delivery coordination and after-sales support.
UK engineering team · Product sourcing · Supply support
Get pricing, sourcing and replacement support
Need Trinamic (Analog Devices) parts, a replacement or another suitable option? Send your part number or describe what the machine needs to do. We connect your requirement with experienced UK engineering and procurement support to help you get the right products, pricing and supply options. Your matched provider can take the enquiry through quotation and ordering to delivery and after-sales support.
- Source original parts or assess suitable alternatives
- Get pricing, lead times and a defined supply proposal
- One enquiry for components, complete axes and ongoing support
No obligation to buy. Choose the quick form below or use the full configurator on this page. Add what you know; an engineer can help with the details.
Need help choosing? Build a specification →Spec builder
Specify what you need instead of TMCM-1316
Select the products and performance you need. Our UK engineering team can use your specification to help source the right components, pricing and supply options. See your summary before adding contact details.
Already know the part number? Use the quick enquiry form. You can configure a requirement below without registering.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
Key specifications
| Voltage (max) | 30 V |
|---|---|
| Data / bus | RS485, USB, step/direction |
| Supply | 10–30 VDC |
| Feedback | external encoder (closed loop) |
| Axes | 1 |
| Current (max) | 5.7 A |
Summarised in our own words from Analog Devices, Inc.'s published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1
Notes on this data
Status 'Production' on the ADI page; encoder interface type not stated.
Specify Motion is not affiliated with Analog Devices, Inc.. Trinamic (Analog Devices) and TMCM-1316 are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Trinamic (Analog Devices) TMCM-1316 replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original Trinamic (Analog Devices) part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
Cost-effective pulse/direction closed-loop drives for CS-M motors, replacing the ES easy-servo drives, up to 8 A and 110 VDC.
| Published maximum | TMCM-1316 | Leadshine CS-D Series |
|---|---|---|
| Continuous current | 5.7 A | 8 A meets or exceeds |
| Axes | 1 | — |
Enhanced pulse-input closed-loop drives with 500 kHz input and encoder outputs, for CS-M and CM-with-encoder motors.
| Published maximum | TMCM-1316 | Leadshine CS1 Series |
|---|---|---|
| Continuous current | 5.7 A | 8 A meets or exceeds |
| Axes | 1 | — |
Dual-axis closed-loop EtherCAT stepper drive, open/closed loop selectable, optional STO.
| Published maximum | TMCM-1316 | Leadshine 2CS3E Series |
|---|---|---|
| Continuous current | 5.7 A | 7 A meets or exceeds |
| Axes | 1 | 2 meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What a closed-loop stepper drive is
A closed-loop stepper drive runs a stepper motor with encoder feedback. It compares commanded and actual position and corrects errors, preventing missed steps under varying load. Many drives also adjust current to the load, running cooler and quieter than open-loop drives, and can raise an alarm on position error. The drive typically accepts step and direction pulses, or fieldbus commands, and is matched to a motor fitted with a specific encoder.
When engineers choose a closed-loop stepper drive
Choose a closed-loop stepper drive when open-loop steppers risk losing steps, run too hot or need fault reporting, but a full servo system is not justified. It suits indexing, packaging and pick-and-place axes. The trade-offs are cost and compatibility: the motor needs a compatible encoder, and dynamics remain below a servo at high speed. For simple steady loads, an open-loop drive is cheaper.
How to specify the Trinamic (Analog Devices) TMCM-1316
Send these with your enquiry and an engineer can confirm the right TMCM-1316 variant or an equivalent:
- Supply voltage (V DC or AC)
- Phase current (A)
- Encoder type and resolution
- Command interface
- Alarm and fault outputs
- Tuning modes
- Motor compatibility
Common mistakes to avoid
- Using an encoder resolution or wiring the drive does not support
- Not connecting the alarm output
- Expecting servo performance at high speed
- Skipping tuning on heavy loads
Trinamic (Analog Devices) TMCM-1316: frequently asked questions
Can you help replace Trinamic (Analog Devices) TMCM-1316 or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including supply-network options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Trinamic (Analog Devices) TMCM-1316?
Single-axis stepper controller/driver for closed-loop operation with an external encoder, using the TMC4361 and TMC5160: 10–30 V, up to 5.7 A RMS, RS485, USB and step/direction. Published series figures include voltage 30 V, axes 1, current 5.7 A. It is made by Analog Devices, Inc.; Specify Motion can help source it or propose an equivalent.
Who makes the Trinamic (Analog Devices) TMCM-1316?
The Trinamic (Analog Devices) TMCM-1316 is made by Trinamic (Analog Devices) (Analog Devices, Inc.) and is listed here for engineers comparing options. Specify Motion is not affiliated with Analog Devices, Inc.; brand names are used only to identify the product.
What is the voltage of the Trinamic (Analog Devices) TMCM-1316?
The published series maximum voltage is 30 V. Individual models and sizes in the TMCM-1316 range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Trinamic (Analog Devices) TMCM-1316?
We can assess suitable replacement options. On published figures, Leadshine CS-D Series and Leadshine CS1 Series are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
What happens when a closed-loop stepper hits an overload?
The drive detects position error from the encoder and increases current to correct it. If the error exceeds a set threshold, the drive raises an alarm and may disable the motor. This prevents silent position loss. The controller should respond to the alarm output.
Can I use any encoder with a closed-loop stepper drive?
Usually not. Closed-loop drives support specific encoder types, resolutions and wiring, often matched to motors from the same range. Check compatibility before mixing motors and drives. Using an unsupported encoder can prevent the closed-loop functions, stall detection and current optimisation from working at all.
Further reading: Closed loop stepper motors explained · How to select a stepper drive · Servo drives
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Trinamic (Analog Devices) TMCM-1316: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
UK engineering input · A route to buying the right products
From your enquiry to products, delivery and support
Specify Motion helps turn a part number or application into a purchasing enquiry. We provide recommendations and connect your requirement with a relevant engineering or procurement provider for product selection, pricing, sourcing and supply.
- Tell us what you needSend a code or configure the application, quantities and timing.
- Reach a relevant providerAccess experienced UK engineering input and a suitable procurement route.
- Review the quotationYour provider confirms the products, price, compatibility checks and supply terms.
- Order with delivery and support agreedConfirm delivery, warranty and after-sales arrangements with the contracting provider.
You choose whether to proceed with the provider and should carry out your own checks. Website and introduction service terms.