Integrated stepper motor
Trinamic (Analog Devices) PANdrive PD42-1241 integrated stepper motor
NEMA 17 PANdrive integrated stepper combining the TMCM-1241 module and motor: 0.20–0.80 Nm holding torque, 10–30 V, up to 3 A RMS, SensOstep 1,024-count encoder and USB, RS485 and CAN.
Need this part, a replacement or a complete package? Our experienced UK engineering team helps you select, source and obtain the right products, with pricing, delivery coordination and after-sales support.
UK engineering team · Product sourcing · Supply support
Get pricing, sourcing and replacement support
Need Trinamic (Analog Devices) parts, a replacement or another suitable option? Send your part number or describe what the machine needs to do. We connect your requirement with experienced UK engineering and procurement support to help you get the right products, pricing and supply options. Your matched provider can take the enquiry through quotation and ordering to delivery and after-sales support.
- Source original parts or assess suitable alternatives
- Get pricing, lead times and a defined supply proposal
- One enquiry for components, complete axes and ongoing support
No obligation to buy. Choose the quick form below or use the full configurator on this page. Add what you know; an engineer can help with the details.
Need help choosing? Build a specification →Spec builder
Specify what you need instead of PANdrive PD42-1241
Select the products and performance you need. Our UK engineering team can use your specification to help source the right components, pricing and supply options. See your summary before adding contact details.
Already know the part number? Use the quick enquiry form. You can configure a requirement below without registering.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
Key specifications
| Voltage (max) | 30 V |
|---|---|
| Data / bus | USB, RS485, CAN, step/direction |
| Frame sizes | 42 mm |
| Supply | 10–30 VDC (24 V nominal) |
| Feedback | integrated SensOstep magnetic encoder, 1,024 increments/rev; external AB encoder input |
| Current (max) | 3 A |
| Holding torque | 0.2–0.8 Nm |
| NEMA sizes | 17 |
Summarised in our own words from Analog Devices, Inc.'s published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1
Notes on this data
Figures from the TMCL firmware manual; a CANopen firmware manual is also published. Production status not checked.
Specify Motion is not affiliated with Analog Devices, Inc.. Trinamic (Analog Devices) and PANdrive PD42-1241 are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Trinamic (Analog Devices) PANdrive PD42-1241 replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original Trinamic (Analog Devices) part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
Closed-loop integrated stepper (motor, 14-bit encoder and drive) with pulse/direction input, NEMA 17-24 up to 3.5 Nm.
| Published maximum | PANdrive PD42-1241 | Leadshine iCS Series |
|---|---|---|
| Holding torque | 0.8 Nm | 3.5 Nm meets or exceeds |
| Current | 3 A | 7 A meets or exceeds |
Open-loop stepper motor with built-in drive, pulse/direction controlled, in NEMA 17, 23 and 24 up to 3.5 Nm.
| Published maximum | PANdrive PD42-1241 | Leadshine iEM Series |
|---|---|---|
| Holding torque | 0.8 Nm | 3.5 Nm meets or exceeds |
| Current | 3 A | 7 A meets or exceeds |
Integrated stepper with drive, optional controller and hMT closed-loop technology, in NEMA 17/23/34, available as pulse/direction, RS-422/485 motion control, CANopen or multi-protocol Ethernet versions.
| Published maximum | PANdrive PD42-1241 | Novanta IMS Liberty MDrive (LMD / LMH) |
|---|---|---|
| Holding torque | 0.8 Nm | 6.5 Nm meets or exceeds |
| Current | 3 A | 3.5 A meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What an integrated stepper motor is
An integrated stepper motor combines a hybrid stepper, its drive and often a motion controller in a single housing, sometimes with an encoder for closed-loop operation. The unit connects directly to a DC supply and a command interface, which may be pulse and direction, analogue, Modbus, CANopen or industrial Ethernet. Integration removes the separate drive and motor cable, reducing cabinet space and wiring, and some units can store and run simple motion programs on their own.
When engineers choose an integrated stepper motor
Choose an integrated stepper for compact or distributed machines with many small axes, such as format changeover, laboratory automation and small conveyors. Fewer components simplify assembly and reduce wiring faults. The trade-offs are heat and flexibility: electronics on the motor raise local temperature, and the whole unit is replaced on a fault. For high-power steppers or hot environments, separate drives are usually more practical.
How to specify the Trinamic (Analog Devices) PANdrive PD42-1241
Send these with your enquiry and an engineer can confirm the right PANdrive PD42-1241 variant or an equivalent:
- Holding torque and torque at speed (Nm, rpm)
- Frame size (NEMA or mm)
- Supply voltage (V DC)
- Control interface and protocol
- Open or closed loop
- I/O count and stored program capability
- IP code and ambient temperature (°C)
Common mistakes to avoid
- Mounting in a hot spot and derating the electronics
- Choosing the wrong protocol variant for the controller
- Ignoring cable routing and connector orientation
- Overlooking supply sizing for many axes at once
Trinamic (Analog Devices) PANdrive PD42-1241: frequently asked questions
Can you help replace Trinamic (Analog Devices) PANdrive PD42-1241 or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including supply-network options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Trinamic (Analog Devices) PANdrive PD42-1241?
NEMA 17 PANdrive integrated stepper combining the TMCM-1241 module and motor: 0.20–0.80 Nm holding torque, 10–30 V, up to 3 A RMS, SensOstep 1,024-count encoder and USB, RS485 and CAN. Published series figures include voltage 30 V, frame sizes 42 mm, current 3 A, holding torque 0.2 Nm. It is made by Analog Devices, Inc.; Specify Motion can help source it or propose an equivalent.
Who makes the Trinamic (Analog Devices) PANdrive PD42-1241?
The Trinamic (Analog Devices) PANdrive PD42-1241 is made by Trinamic (Analog Devices) (Analog Devices, Inc.) and is listed here for engineers comparing options. Specify Motion is not affiliated with Analog Devices, Inc.; brand names are used only to identify the product.
What is the voltage of the Trinamic (Analog Devices) PANdrive PD42-1241?
The published series maximum voltage is 30 V. Individual models and sizes in the PANdrive PD42-1241 range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Trinamic (Analog Devices) PANdrive PD42-1241?
We can assess suitable replacement options. On published figures, Leadshine iCS Series and Leadshine iEM Series are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
What are the benefits of an integrated stepper motor?
An integrated stepper reduces wiring, cabinet space and assembly time because the drive is built into the motor. It also shortens motor cables, which helps EMC. This suits distributed and modular machines with many small axes. The trade-off is that the electronics share the motor environment.
Can an integrated stepper run without a PLC?
Many integrated steppers can store simple motion programs and respond to digital inputs, so they can run standalone for basic tasks such as indexing or speed control. For coordinated multi-axis machines, a PLC or motion controller usually commands them over a fieldbus.
Further reading: How to select a stepper motor · Closed loop stepper motors explained · Servo and stepper motors
Other integrated stepper motor series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Trinamic (Analog Devices) PANdrive PD42-1241: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
UK engineering input · A route to buying the right products
From your enquiry to products, delivery and support
Specify Motion helps turn a part number or application into a purchasing enquiry. We provide recommendations and connect your requirement with a relevant engineering or procurement provider for product selection, pricing, sourcing and supply.
- Tell us what you needSend a code or configure the application, quantities and timing.
- Reach a relevant providerAccess experienced UK engineering input and a suitable procurement route.
- Review the quotationYour provider confirms the products, price, compatibility checks and supply terms.
- Order with delivery and support agreedConfirm delivery, warranty and after-sales arrangements with the contracting provider.
You choose whether to proceed with the provider and should carry out your own checks. Website and introduction service terms.