IMA-ST33 specifications
| Recorded model parameter | IMA-ST33 |
|---|---|
| Max force (N) | 11100 |
| Max stroke (mm) | 457 |
| Max speed (mm/s) | 500 |
These figures belong to the recorded model entry. They are not the maximum values from the whole series. Confirm the current manufacturer datasheet, test conditions and the complete ordering code before releasing a design or purchase order.
Series context and documents
Hygienic 316 stainless version of the IMA integrated servo actuator, IP69K rated, for volumetric filling, pumping and slicing in food and beverage plants.
Compare the IMA-S / IMA-ST Stainless Integrated Actuator range, options and published series data. The series information was last checked on 2026-10-29; this date is not a stock or delivery confirmation.
Ordering, suffixes and identification
Preserve every character on the nameplate or previous order, including separators, winding and option suffixes. A short model reference can identify a size or performance variant while leaving the connector, feedback, brake or mounting configuration unresolved. Do not assume that two codes with the same prefix are interchangeable.
A serial number identifies an individual unit and can help trace its build or revision. Send it alongside the model code and a clear nameplate photograph. If any characters are unreadable, say which ones rather than guessing. Our replacement information checklist explains what to collect.
Replacement and compatibility checks for IMA-ST33
Tell us whether you need the original part, a current equivalent or a complete axis. For an existing machine, identify which mechanical and control interfaces must stay. A recommendation should state any changes needed, such as adapters, cables, configuration or commissioning.
Application information to include
- Cleaning regime: pressure, temperature and chemicals
- Ingress protection required (IP code, often IP69K)
- Body material grade and surface finish
- Food-grade lubricant requirement
- Force, stroke and speed (N, mm, mm/s)
- Motor and cable sealing
- Zone: food contact, splash or non-food
Published specifications support a comparison; they do not prove installed performance or physical interchangeability. We confirm the scope of the engineering review for your enquiry. See how to assess a motion control alternative.
Questions about Tolomatic IMA-ST33
Can I request a quote for IMA-ST33?
Yes. The quick enquiry form is prefilled with Tolomatic IMA-ST33. Add quantity and required date if known. An engineer can review the exact ordering code and confirm the supply options, pricing and lead time. A catalogue listing does not confirm stock.
Is IMA-ST33 the complete ordering code?
It is the model reference recorded in our IMA-S / IMA-ST Stainless Integrated Actuator catalogue data. Your nameplate or order acknowledgement may carry additional winding, feedback, brake, mounting or revision information. Send the complete code, including suffixes, before ordering.
Can you assess an alternative to IMA-ST33?
We can assess the original component and possible alternatives from our supply network. The published model figures below are a starting point. An alternative is not a tested or drop-in replacement unless the exact configuration and application have been verified.
Other recorded IMA-S / IMA-ST Stainless Integrated Actuator models
Browse linear actuators · Model-code directory · Datasheets and technical resources