GSA32 specifications
| Recorded model parameter | GSA32 |
|---|---|
| Max force (N) | 18500 |
| Max stroke (mm) | 914 |
| Max speed (mm/s) | 1270 |
These figures belong to the recorded model entry. They are not the maximum values from the whole series. Confirm the current manufacturer datasheet, test conditions and the complete ordering code before releasing a design or purchase order.
Series context and documents
RSA-based rod actuator with integral hardened guide rods, bearings and a tooling plate, so it can carry side and offset loads without external guidance.
Compare the GSA Guided Screw Actuator range, options and published series data. The series information was last checked on 2026-10-29; this date is not a stock or delivery confirmation.
Ordering, suffixes and identification
Preserve every character on the nameplate or previous order, including separators, winding and option suffixes. A short model reference can identify a size or performance variant while leaving the connector, feedback, brake or mounting configuration unresolved. Do not assume that two codes with the same prefix are interchangeable.
A serial number identifies an individual unit and can help trace its build or revision. Send it alongside the model code and a clear nameplate photograph. If any characters are unreadable, say which ones rather than guessing. Our replacement information checklist explains what to collect.
Replacement and compatibility checks for GSA32
Tell us whether you need the original part, a current equivalent or a complete axis. For an existing machine, identify which mechanical and control interfaces must stay. A recommendation should state any changes needed, such as adapters, cables, configuration or commissioning.
Application information to include
- Force: peak and continuous or RMS (N)
- Stroke (mm) and retracted length limits
- Speed and acceleration (mm/s, m/s²)
- Duty cycle or full motion profile
- Positioning repeatability (mm)
- Side load and mounting arrangement: trunnion, clevis or flange
- Motor and feedback preference, and environment (IP code, °C)
Published specifications support a comparison; they do not prove installed performance or physical interchangeability. We confirm the scope of the engineering review for your enquiry. See how to assess a motion control alternative.
Questions about Tolomatic GSA32
Can I request a quote for GSA32?
Yes. The quick enquiry form is prefilled with Tolomatic GSA32. Add quantity and required date if known. An engineer can review the exact ordering code and confirm the supply options, pricing and lead time. A catalogue listing does not confirm stock.
Is GSA32 the complete ordering code?
It is the model reference recorded in our GSA Guided Screw Actuator catalogue data. Your nameplate or order acknowledgement may carry additional winding, feedback, brake, mounting or revision information. Send the complete code, including suffixes, before ordering.
Can you assess an alternative to GSA32?
We can assess the original component and possible alternatives from our supply network. The published model figures below are a starting point. An alternative is not a tested or drop-in replacement unless the exact configuration and application have been verified.
Other recorded GSA Guided Screw Actuator models
Browse linear actuators · Model-code directory · Datasheets and technical resources