Multi-axis servo drive
Copley Controls Xenus PLUS dual-axis (XE2/XP2/XM2) multi-axis servo drive
Two-axis AC-line servo drive for 100–240 V AC rated 10 A continuous and 20 A peak, with EtherCAT, CANopen or MACRO versions and STO to SIL 3, Cat 3, PL d.
Need this part, a replacement or a better-fit option? Our engineers help with selection, procurement, sourcing, competitive pricing and lead times.
Engineering support · Product sourcing · Procurement
Get pricing or a checked replacement
Need Copley Controls parts, a replacement or another suitable option? Send your part number or describe the application. We’ll review the requirement and help with product selection, sourcing, pricing and lead times.
- Exact parts and engineer-checked alternatives
- Manufacturer-direct options where available
- Standard, modified and custom solutions
No obligation to buy. Have a datasheet, drawing or nameplate photo? Reply to your confirmation email to attach it.
Need help choosing? Build a specification →Need help choosing? Open the specification builder
Spec builder
Specify what you need instead of Xenus PLUS dual-axis (XE2/XP2/XM2)
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Key specifications
| Data / bus | EtherCAT, EtherNet/IP, CANopen, MACRO |
|---|---|
| Supply | 100–240 V AC |
| Feedback | BiSS-C, SSI, Absolute A, EnDat, incremental, Halls, sin/cos; resolver option (XE2, XP2) |
| Fieldbus | XE2: EtherCAT, EtherNet/IP, Modbus TCP; XP2: CANopen, DeviceNet, J1939; XM2: MACRO |
| Axes | 2 |
| Continuous current (max) | 10 A |
| Peak current (max) | 20 A |
| Safe torque off | SIL 3, Cat 3, PL d |
Summarised in our own words from Analogic Corporation's published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1
Notes on this data
Current figures as listed per model; page does not state explicitly whether per axis.
Specify Motion is not affiliated with Analogic Corporation. Copley Controls and Xenus PLUS dual-axis (XE2/XP2/XM2) are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Copley Controls Xenus PLUS dual-axis (XE2/XP2/XM2) replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original Copley Controls part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
A dual-axis version of the ELD2 for 24-70 VDC systems: 20 or 30 Arms per axis (750 W or 1.2 kW per axis), gantry synchronisation and STO, saving around 30% installed volume versus two single drives.
| Published maximum | Xenus PLUS dual-axis (XE2/XP2/XM2) | 2ELD2 Two-Axis DC Servo Drives |
|---|---|---|
| Continuous current | 10 A | 30 A meets or exceeds |
| Peak current | 20 A | 90 A meets or exceeds |
| Power | — | 1,200 W |
| Axes | 2 | 2 meets or exceeds |
A dual-axis low-voltage Kinco drive for AGV differential-drive wheels, with RS + CANopen or RS + pulse variants and built-in brake output.
| Published maximum | Xenus PLUS dual-axis (XE2/XP2/XM2) | FDS Two-in-One Low-Voltage DC Servo Dr… |
|---|---|---|
| Continuous current | 10 A | — |
| Peak current | 20 A | — |
| Axes | 2 | 2 meets or exceeds |
AMC's analogue servo drives for centralised control schemes: set up with DIP switches and potentiometers, commanded by +/-10 V or PWM. They span 10-400 VDC and 45-265 VAC, up to 150 A continuous and 250 A peak, in PCB, panel and vehicle formats. PCB extended-environment parts run -40 to +85 C.
| Published maximum | Xenus PLUS dual-axis (XE2/XP2/XM2) | AxCent Analogue Servo Drives (AB, AZ, … |
|---|---|---|
| Continuous current | 10 A | 150 A meets or exceeds |
| Peak current | 20 A | 250 A meets or exceeds |
| Axes | 2 | — |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What a multi-axis servo drive is
A multi-axis servo drive controls two or more servo motors from one unit, usually sharing a power supply, DC bus and communication interface. Formats include compact two- to four-axis drives in one housing and modular systems with a common supply module and separate axis modules. Sharing the bus lets energy from a decelerating axis be used by others, reducing braking losses. Most connect to a motion controller or PLC over EtherCAT or another industrial Ethernet network.
When engineers choose a multi-axis servo drive
Choose a multi-axis drive for machines with several coordinated servo axes in one cabinet, such as robots, packaging machines and gantries. It saves space, wiring and cost per axis compared with single drives. The trade-offs are flexibility and fault isolation: axes share the supply, so a supply fault affects all axes, and replacing one module may need specific spare strategy. Mixing very different power levels can be limited by module ranges.
How to specify the Copley Controls Xenus PLUS dual-axis (XE2/XP2/XM2)
Send these with your enquiry and an engineer can confirm the right Xenus PLUS dual-axis (XE2/XP2/XM2) variant or an equivalent:
- Number of axes and power per axis (A, kW)
- Supply voltage (V AC or DC)
- Network interface and cycle time
- Motor and feedback types
- Shared bus and regenerative energy handling
- Safety functions per axis
- Cabinet size and cooling
Common mistakes to avoid
- Sizing supply module for the sum of peaks without considering simultaneous demand
- Ignoring how one fault affects all axes
- Choosing modules without room for future axes
- Overlooking network cycle time with many axes
Copley Controls Xenus PLUS dual-axis (XE2/XP2/XM2): frequently asked questions
Can you help replace Copley Controls Xenus PLUS dual-axis (XE2/XP2/XM2) or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including Motion Control Products options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Copley Controls Xenus PLUS dual-axis (XE2/XP2/XM2)?
Two-axis AC-line servo drive for 100–240 V AC rated 10 A continuous and 20 A peak, with EtherCAT, CANopen or MACRO versions and STO to SIL 3, Cat 3, PL d. Published series figures include axes 2, continuous current 10 A, peak current 20 A. It is made by Analogic Corporation; Specify Motion can help source it or propose an equivalent.
Who makes the Copley Controls Xenus PLUS dual-axis (XE2/XP2/XM2)?
The Copley Controls Xenus PLUS dual-axis (XE2/XP2/XM2) is made by Copley Controls (Analogic Corporation) and is listed here for engineers comparing options. Specify Motion is not affiliated with Analogic Corporation; brand names are used only to identify the product.
What is the axes of the Copley Controls Xenus PLUS dual-axis (XE2/XP2/XM2)?
The published series maximum axes is 2. Individual models and sizes in the Xenus PLUS dual-axis (XE2/XP2/XM2) range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Copley Controls Xenus PLUS dual-axis (XE2/XP2/XM2)?
We can assess suitable replacement options. On published figures, Leadshine 2ELD2 Two-Axis DC Servo Drives and Kinco FDS Two-in-One Low-Voltage DC Servo Drive (FDS-AB/CB/LB-D) are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
What are the benefits of a shared DC bus?
On a shared DC bus, energy regenerated by a decelerating axis can be used by other axes that are accelerating, reducing the energy dissipated in braking resistors. It also reduces wiring and supply components. Sizing must consider simultaneous peak demand on the shared supply.
Are multi-axis drives cheaper than single-axis drives?
Typically, per axis, multi-axis drives cost less and take less cabinet space, because the supply, communication and housing are shared. The saving grows with the number of axes. For machines with only one or two axes, or widely separated axes, single drives can be simpler.
Further reading: How to select a multi axis servo drive · How to select a servo drive · Servo drives
Other multi-axis servo drive series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Copley Controls Xenus PLUS dual-axis (XE2/XP2/XM2): the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.