Multi-axis servo drive
Kollmorgen AKD2G multi-axis servo drive
Second-generation AKD offered in single- and dual-axis versions, adding on-board functional safety, a graphical display and SD-card backup, aimed at single-cable motor connection with AKM2G.
Key specifications
| Power (max) | 16,000 W |
|---|---|
| Supply | 120/240 Vac (6V models) or 240/480 Vac (7V models) |
| Feedback | EnDat 2.2, BiSS, resolver, A quad B encoder, HIPERFACE DSL (safe), dual-loop |
| Fieldbus | EtherCAT (FSoE), CANopen, PROFINET IRT, EtherNet/IP with CIP Sync |
| Axes | 2 |
| Continuous current (max) | 24 A |
| Peak current (max) | 72 A |
| Safety | STO SIL2/PLd standard; optional SafeMotion Monitor to SIL3/PLe |
Summarised in our own words from Regal Rexnord Corporation's published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1 · Source 2
Notes on this data
Per-axis ratings 3-24 A rms continuous, 9-72 A peak; dual-axis versions up to 6 A + 6 A. 24 A single-axis (AKD2G-7V24S) gives 72 A peak (3x for up to 5 s). Typical shaft power 1-16 kW per axis. IP rating not published on the page.
Specify Motion is not affiliated with Regal Rexnord Corporation. Kollmorgen and AKD2G are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Alternatives that meet or exceed these figures
Engineers often come to us with a Kollmorgen part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These 3 series from our supply network are the closest match on published figures.
A dual-axis version of the ELD2 for 24-70 VDC systems: 20 or 30 Arms per axis (750 W or 1.2 kW per axis), gantry synchronisation and STO, saving around 30% installed volume versus two single drives.
| Published maximum | AKD2G | 2ELD2 Two-Axis DC Servo Drives |
|---|---|---|
| Continuous current | 24 A | 30 A meets or exceeds |
| Peak current | 72 A | 90 A meets or exceeds |
| Power | 16,000 W | 1,200 W |
| Axes | 2 | 2 meets or exceeds |
Network-capable AMC digital drives spanning 10-747 VDC and 120-480 VAC, up to 150 A continuous and 250 A peak (27.4 kW peak power), in PCB, panel, machine and vehicle formats. They support almost any motor type and feedback, plus CANopen, EtherCAT, POWERLINK and Modbus.
| Published maximum | AKD2G | DigiFlex Performance Servo Drives (DP,… |
|---|---|---|
| Continuous current | 24 A | 150 A meets or exceeds |
| Peak current | 72 A | 250 A meets or exceeds |
| Power | 16,000 W | 27,400 W meets or exceeds |
| Axes | 2 | — |
A dual-axis low-voltage Kinco drive for AGV differential-drive wheels, with RS + CANopen or RS + pulse variants and built-in brake output.
| Published maximum | AKD2G | FDS Two-in-One Low-Voltage DC Servo Dr… |
|---|---|---|
| Continuous current | 24 A | — |
| Peak current | 72 A | — |
| Power | 16,000 W | — |
| Axes | 2 | 2 meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
What a multi-axis servo drive is
A multi-axis servo drive controls two or more servo motors from one unit, usually sharing a power supply, DC bus and communication interface. Formats include compact two- to four-axis drives in one housing and modular systems with a common supply module and separate axis modules. Sharing the bus lets energy from a decelerating axis be used by others, reducing braking losses. Most connect to a motion controller or PLC over EtherCAT or another industrial Ethernet network.
When engineers choose a multi-axis servo drive
Choose a multi-axis drive for machines with several coordinated servo axes in one cabinet, such as robots, packaging machines and gantries. It saves space, wiring and cost per axis compared with single drives. The trade-offs are flexibility and fault isolation: axes share the supply, so a supply fault affects all axes, and replacing one module may need specific spare strategy. Mixing very different power levels can be limited by module ranges.
How to specify the Kollmorgen AKD2G
Send these with your enquiry and an engineer can confirm the right AKD2G variant or an equivalent:
- Number of axes and power per axis (A, kW)
- Supply voltage (V AC or DC)
- Network interface and cycle time
- Motor and feedback types
- Shared bus and regenerative energy handling
- Safety functions per axis
- Cabinet size and cooling
Common mistakes to avoid
- Sizing supply module for the sum of peaks without considering simultaneous demand
- Ignoring how one fault affects all axes
- Choosing modules without room for future axes
- Overlooking network cycle time with many axes
Kollmorgen AKD2G: frequently asked questions
What is the Kollmorgen AKD2G?
Second-generation AKD offered in single- and dual-axis versions, adding on-board functional safety, a graphical display and SD-card backup, aimed at single-cable motor connection with AKM2G. Published series figures include power 16,000 W, axes 2, continuous current 24 A, peak current 72 A. It is made by Regal Rexnord Corporation; Specify Motion can help source it or propose an equivalent.
Who makes the Kollmorgen AKD2G?
The Kollmorgen AKD2G is made by Kollmorgen (Regal Rexnord Corporation) and is listed here for engineers comparing options. Specify Motion is not affiliated with Regal Rexnord Corporation; brand names are used only to identify the product.
What is the power of the Kollmorgen AKD2G?
The published series maximum power is 16,000 W. Individual models and sizes in the AKD2G range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Kollmorgen AKD2G?
Yes. On published figures, Leadshine 2ELD2 Two-Axis DC Servo Drives and ADVANCED Motion Controls DigiFlex Performance Servo Drives (DP, DZ, DV) are the closest match from our supply network. An engineer confirms the fit against your application before recommending anything.
What are the benefits of a shared DC bus?
On a shared DC bus, energy regenerated by a decelerating axis can be used by other axes that are accelerating, reducing the energy dissipated in braking resistors. It also reduces wiring and supply components. Sizing must consider simultaneous peak demand on the shared supply.
Are multi-axis drives cheaper than single-axis drives?
Typically, per axis, multi-axis drives cost less and take less cabinet space, because the supply, communication and housing are shared. The saving grows with the number of axes. For machines with only one or two axes, or widely separated axes, single drives can be simpler.
Further reading: How to select a multi axis servo drive · How to select a servo drive · Servo drives
Other multi-axis servo drive series
Spec builder
Specify what you need instead of AKD2G
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Kollmorgen AKD2G: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.