Integrated-motor actuator
SCHUNK ELP compact linear axis integrated-motor actuator
Linear direct-drive axis with integrated controller and digital I/O, set up with rotary switches for ten speeds; the ELP 050-H040 moves 3 kg horizontally over 40 mm at ±0.01 mm repeatability on 24 V.
Need this part, a replacement or a better-fit option? Our engineers help with selection, procurement, sourcing, competitive pricing and lead times.
Engineering support · Product sourcing · Procurement
Get pricing or a checked replacement
Need SCHUNK parts, a replacement or another suitable option? Send your part number or describe the application. We’ll review the requirement and help with product selection, sourcing, pricing and lead times.
- Exact parts and engineer-checked alternatives
- Manufacturer-direct options where available
- Standard, modified and custom solutions
No obligation to buy. Have a datasheet, drawing or nameplate photo? Reply to your confirmation email to attach it.
Need help choosing? Build a specification →Need help choosing? Open the specification builder
Spec builder
Specify what you need instead of ELP compact linear axis
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Key specifications
| Voltage (max) | 24 V |
|---|---|
| Ingress protection | IP20 |
| Temperature | 5–55 °C |
| Stroke (max) | 40 mm |
| Repeatability | 0.01 mm |
| Supply | 24 V nominal |
| Interface | Digital I/O |
| Payload (max) | 3 kg |
Summarised in our own words from SCHUNK SE & Co. KG's published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1 · Source 2
Notes on this data
Specs from the ELP 050-H040 variant only; other sizes have longer strokes.
Specify Motion is not affiliated with SCHUNK SE & Co. KG. SCHUNK and ELP compact linear axis are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
SCHUNK ELP compact linear axis replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original SCHUNK part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
Rod actuator with a built-in servo motor driving a ball or roller screw, in four sizes up to 30.6 kN, offered in white food-grade and black heavy-duty finishes.
| Published maximum | ELP compact linear axis | IMA Integrated Motor Actuator |
|---|---|---|
| Force | — | 30,600 N |
| Stroke | 40 mm | 457 mm meets or exceeds |
| Speed | — | 1,334 mm/s |
Compact C7 ballscrew linear module with built-in guide, matched to 100-400 W servo motors from the main Japanese and Taiwanese brands.
| Published maximum | ELP compact linear axis | BLM Built-in Linear Module |
|---|---|---|
| Stroke | 40 mm | 1,250 mm meets or exceeds |
| Speed | — | 1,600 mm/s |
12/24 VDC acme leadscrew push/pull actuator with internal gearbox and built-in limit switches, for light-industrial, mobility and furniture automation.
| Published maximum | ELP compact linear axis | G-Series Leadscrew Linear Actuator |
|---|---|---|
| Force | — | 6,000 N |
| Stroke | 40 mm | 400 mm meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What an integrated-motor actuator is
An integrated-motor actuator combines the servo motor and the screw in one body, often with the motor rotor driving the screw or nut directly instead of through a coupling or belt. Many use an inverted roller screw inside a hollow rotor for a very compact, stiff design. Some versions also integrate the servo drive and position controller, so the actuator needs only power and a command or fieldbus connection. The result is a shorter, sealed unit with fewer parts to align.
When engineers choose an integrated-motor actuator
Choose an integrated-motor actuator when space is tight, a clean sealed package is wanted, or decentralised control reduces cabinet size and cabling. It suits welding guns, robot cells and hygienic plant. The trade-offs are flexibility and service: the motor cannot be changed independently, thermal limits are shared and repairs may mean replacing the whole unit. A separate motor and actuator lets you change motor size or brand later and is often easier to source as spare parts.
How to specify the SCHUNK ELP compact linear axis
Send these with your enquiry and an engineer can confirm the right ELP compact linear axis variant or an equivalent:
- Force, peak and continuous (N)
- Stroke (mm) and speed (mm/s)
- Supply voltage: mains AC or low-voltage DC (V)
- Control interface: analogue, pulse, Modbus or industrial Ethernet
- Feedback and absolute position needs
- Duty cycle and ambient temperature (°C)
- Sealing and cleaning requirements (IP code)
Common mistakes to avoid
- Overlooking heat build-up when motor and screw share one housing
- Assuming any drive will run it, when integrated units may need a matched drive
- Not checking cable routing and connector orientation on the machine
- Forgetting spare strategy when the whole unit is one part
SCHUNK ELP compact linear axis: frequently asked questions
Can you help replace SCHUNK ELP compact linear axis or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including Motion Control Products options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the SCHUNK ELP compact linear axis?
Linear direct-drive axis with integrated controller and digital I/O, set up with rotary switches for ten speeds; the ELP 050-H040 moves 3 kg horizontally over 40 mm at ±0.01 mm repeatability on 24 V. Published series figures include voltage 24 V, temperature 5 °C, temperature 55 °C, stroke 40 mm. It is made by SCHUNK SE & Co. KG; Specify Motion can help source it or propose an equivalent.
Who makes the SCHUNK ELP compact linear axis?
The SCHUNK ELP compact linear axis is made by SCHUNK (SCHUNK SE & Co. KG) and is listed here for engineers comparing options. Specify Motion is not affiliated with SCHUNK SE & Co. KG; brand names are used only to identify the product.
What is the voltage of the SCHUNK ELP compact linear axis?
The published series maximum voltage is 24 V. Individual models and sizes in the ELP compact linear axis range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the SCHUNK ELP compact linear axis?
We can assess suitable replacement options. On published figures, Tolomatic IMA Integrated Motor Actuator and Motion Control Products BLM Built-in Linear Module are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
What are the advantages of an integrated motor actuator?
Combining motor and screw removes couplings, belts and the alignment that goes with them, so the actuator is shorter, stiffer and easier to seal. Versions with built-in drives also reduce cabinet space and cable runs. The downside is less flexibility for changing motor size and a larger, more expensive spare part.
Can an integrated actuator be controlled from a PLC?
Yes. Versions with built-in drives typically accept analogue, pulse and direction, discrete I/O or industrial Ethernet commands from a PLC. Versions without a drive need a compatible servo drive, often from a matched range. State the controller and network protocol at the outset so the right variant is selected.
Further reading: How to select a linear actuator · Ball screw vs roller screw · Linear actuators
Other integrated-motor actuator series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the SCHUNK ELP compact linear axis: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.