CMMT-AS-C18-11A-P3-MP-S1 specifications
| Recorded model parameter | CMMT-AS-C18-11A-P3-MP-S1 |
|---|---|
| Nominal current (A) | 18 |
| Nominal power (W) | 9000 |
| Supply | 400 VAC 3-ph |
These figures belong to the recorded model entry. They are not the maximum values from the whole series. Confirm the current manufacturer datasheet, test conditions and the complete ordering code before releasing a design or purchase order.
Series context and documents
Servo drive for EMMT motors and Festo electric axes, from 350 W single-phase to 12 kW three-phase, with EtherCAT, PROFINET, EtherNet/IP and Modbus TCP and STO/SBC up to SIL3 PL e.
Compare the CMMT-AS range, options and published series data. The series information was last checked on 2026-10-30; this date is not a stock or delivery confirmation.
Ordering, suffixes and identification
Preserve every character on the nameplate or previous order, including separators, winding and option suffixes. A short model reference can identify a size or performance variant while leaving the connector, feedback, brake or mounting configuration unresolved. Do not assume that two codes with the same prefix are interchangeable.
A serial number identifies an individual unit and can help trace its build or revision. Send it alongside the model code and a clear nameplate photograph. If any characters are unreadable, say which ones rather than guessing. Our replacement information checklist explains what to collect.
Replacement and compatibility checks for CMMT-AS-C18-11A-P3-MP-S1
Tell us whether you need the original part, a current equivalent or a complete axis. For an existing machine, identify which mechanical and control interfaces must stay. A recommendation should state any changes needed, such as adapters, cables, configuration or commissioning.
Application information to include
- Supply voltage and phases (V AC)
- Continuous and peak output current (A rms)
- Motor and feedback compatibility
- Command interface: pulse, analogue, EtherCAT, PROFINET and so on
- Safety functions, such as STO, and their rating (SIL, PL)
- Braking resistor and regenerative energy (W, J)
- Ambient temperature, mounting and cooling
Published specifications support a comparison; they do not prove installed performance or physical interchangeability. We confirm the scope of the engineering review for your enquiry. See how to assess a motion control alternative.
Questions about Festo CMMT-AS-C18-11A-P3-MP-S1
Can I request a quote for CMMT-AS-C18-11A-P3-MP-S1?
Yes. The quick enquiry form is prefilled with Festo CMMT-AS-C18-11A-P3-MP-S1. Add quantity and required date if known. An engineer can review the exact ordering code and confirm the supply options, pricing and lead time. A catalogue listing does not confirm stock.
Is CMMT-AS-C18-11A-P3-MP-S1 the complete ordering code?
It is the model reference recorded in our CMMT-AS catalogue data. Your nameplate or order acknowledgement may carry additional winding, feedback, brake, mounting or revision information. Send the complete code, including suffixes, before ordering.
Can you assess an alternative to CMMT-AS-C18-11A-P3-MP-S1?
We can assess the original component and possible alternatives from our supply network. The published model figures below are a starting point. An alternative is not a tested or drop-in replacement unless the exact configuration and application have been verified.
Other recorded CMMT-AS models
Browse servo drives · Model-code directory · Datasheets and technical resources
Specify Motion is not affiliated with Festo SE & Co. KG. Manufacturer names and model references identify the components being discussed.