Skip to content
Start a spec →

Voice coil motor · Exact model reference

Akribis Systems AVM130-HF-10

AVM130-HF-10 is a model reference in the Akribis Systems AVM High-Force (AVM-HF) range.

Check the recorded model specifications below, request the original part or ask for an alternative assessment. Include the full ordering suffix when you enquire.

Get pricing for AVM130-HF-10 →Configure your applicationView model specifications ↓

Pricing and availability

Need AVM130-HF-10, its datasheet or an alternative?

Need Akribis Systems parts, a replacement or a suitable alternative? Send us a part number, or tell us what the machine needs to do. Our UK engineers will come back with the right product, pricing, lead time and delivery, whether that is the original part, a checked alternative or a complete axis.

  • Original parts or a checked alternative
  • Pricing, lead time and delivery in one reply
  • Components, complete axes and ongoing support

No obligation. Add what you know and an engineer will help with the rest. Prefer to configure it? Build a specification.

Add quantity, timing or application notes (optional)

AVM130-HF-10 specifications

Recorded model parameterAVM130-HF-10
Continuous force (N)150.8
Peak force (N)452.3
Stroke (mm)10

These figures belong to the recorded model entry. They are not the maximum values from the whole series. Confirm the current manufacturer datasheet, test conditions and the complete ordering code before releasing a design or purchase order.

Series context and documents

High-force cylindrical voice coils from 14 to 250 mm, reaching over 1 kN continuous for heavy short-stroke force control.

Compare the AVM High-Force (AVM-HF) range, options and published series data. The series information was last checked on 2026-10-29; this date is not a stock or delivery confirmation.

Ordering, suffixes and identification

Preserve every character on the nameplate or previous order, including separators, winding and option suffixes. A short model reference can identify a size or performance variant while leaving the connector, feedback, brake or mounting configuration unresolved. Do not assume that two codes with the same prefix are interchangeable.

A serial number identifies an individual unit and can help trace its build or revision. Send it alongside the model code and a clear nameplate photograph. If any characters are unreadable, say which ones rather than guessing. Our replacement information checklist explains what to collect.

Replacement and compatibility checks for AVM130-HF-10

Tell us whether you need the original part, a current equivalent or a complete axis. For an existing machine, identify which mechanical and control interfaces must stay. A recommendation should state any changes needed, such as adapters, cables, configuration or commissioning.

Application information to include

  • Stroke (mm)
  • Peak and continuous force (N)
  • Force constant (N/A)
  • Moving mass and payload (g or kg)
  • Bandwidth or settling time (Hz, ms)
  • Guidance and feedback
  • Drive supply and current (V, A)

Published specifications support a comparison; they do not prove installed performance or physical interchangeability. We confirm the scope of the engineering review for your enquiry. See how to assess a motion control alternative.

Request an assessment for AVM130-HF-10 →Build a fuller specification

Questions about Akribis Systems AVM130-HF-10

Can I request a quote for AVM130-HF-10?

Yes. The quick enquiry form is prefilled with Akribis Systems AVM130-HF-10. Add quantity and required date if known. An engineer can review the exact ordering code and confirm the supply options, pricing and lead time. A catalogue listing does not confirm stock.

Is AVM130-HF-10 the complete ordering code?

It is the model reference recorded in our AVM High-Force (AVM-HF) catalogue data. Your nameplate or order acknowledgement may carry additional winding, feedback, brake, mounting or revision information. Send the complete code, including suffixes, before ordering.

Can you assess an alternative to AVM130-HF-10?

We can assess the original component and possible alternatives from our supply network. The published model figures below are a starting point. An alternative is not a tested or drop-in replacement unless the exact configuration and application have been verified.

Other recorded AVM High-Force (AVM-HF) models

AVM14-HF-5AVM14-HF-10AVM20-HF-6AVM20-HF-15AVM20-HF-35AVM24-HF-5

Browse linear actuators · Model-code directory · Datasheets and technical resources

Spec builder

Configure the application for AVM130-HF-10

Select every part you need and answer the questions an applications engineer would ask. Our engineers use your specification to come back with the right products, pricing and lead times. You see your summary before we ask for any details.

Already know the part number? Send it to us directly.

  1. 1Products
  2. 2Performance
  3. 3Environment
  4. 4Volumes
  5. 5Your spec
Step 1 of 5

What are you specifying?

Select everything you need. A motor, drive and gearbox can be specified together as one axis.

1 selected: Linear actuator

How it works

From enquiry to delivery

Send a part number or describe the application. Our engineers take it from there: the right product, a clear quotation, and delivery and support arranged.

  1. Tell us what you needSend a part number, or configure the application, quantities and timing.
  2. An engineer reviews itWe check the specification and find the original part, a checked equivalent or a complete axis.
  3. Receive your quotationProducts, pricing, lead time and compatibility notes in one reply.
  4. Order and deliveryWhen you are happy, the order is placed and delivery and after-sales support are arranged.
Get pricing →Build a specification