Planetary gearbox
Neugart PLE economy planetary gearbox
Economy in-line planetary gearbox with shaft output in frames 40 to 160 mm, ratios 3:1 to 512:1, maximum output torques up to 1,280 Nm and standard backlash from under 6 arcmin (series figures).
Need this part, a replacement or a complete package? Our experienced UK engineering team helps you select, source and obtain the right products, with pricing, delivery coordination and after-sales support.
Pricing and availability
Get pricing, sourcing and replacement support
Need Neugart parts, a replacement or a suitable alternative? Send us a part number, or tell us what the machine needs to do. Our UK engineers will come back with the right product, pricing, lead time and delivery, whether that is the original part, a checked alternative or a complete axis.
- Original parts or a checked alternative
- Pricing, lead time and delivery in one reply
- Components, complete axes and ongoing support
No obligation. Add what you know and an engineer will help with the rest. Prefer to configure it? Build a specification.
Spec builder
Specify what you need instead of PLE economy planetary gearbox
Select every part you need and answer the questions an applications engineer would ask. Our engineers use your specification to come back with the right products, pricing and lead times. You see your summary before we ask for any details.
Already know the part number? Send it to us directly.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
Key specifications
| Speed (max) | 18,000 rpm |
|---|---|
| Ingress protection | IP54 |
| Temperature | -25–90 °C |
| Rated torque (max) | 680 Nm |
| Peak torque (max) | 1,280 Nm |
| Frame sizes | 40, 60, 80, 120, 160 |
| Ratio | 3–512:1 |
| Backlash (max) | 22 arcmin |
| Efficiency | 92-98 % |
| Backlash | <6 to <22 arcmin standard, by size and stage |
Summarised in our own words from Neugart GmbH (Neugart Holding GmbH, family-owned)'s published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1
Notes on this data
torque_Nm_rated_max is the continuous T2D maximum (PLE160, two-stage); T2max is maximum torque. Max input speed 18,000 rpm applies to PLE040.
Specify Motion is not affiliated with Neugart GmbH (Neugart Holding GmbH, family-owned). Neugart and PLE economy planetary gearbox are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Neugart PLE economy planetary gearbox replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original Neugart part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
Apex Dynamics high-precision helical planetary with a one-piece stainless planet cage and very short length; ADS adds a keyed input shaft for belt pulley or coupling drive.
| Published maximum | PLE economy planetary gearbox | AD / ADR / ADS |
|---|---|---|
| Rated torque | 680 Nm | — |
| Peak torque | 1,280 Nm | — |
| Ratio (max) | 512:1 | — |
| Backlash (lower is better) | 22 arcmin | 1 arcmin meets or exceeds |
High-precision round-flange planetary with high input speed capability and near-zero backlash, aimed at robotics and CNC.
| Published maximum | PLE economy planetary gearbox | WAE |
|---|---|---|
| Rated torque | 680 Nm | — |
| Peak torque | 1,280 Nm | — |
| Ratio (max) | 512:1 | — |
| Backlash (lower is better) | 22 arcmin | 2 arcmin meets or exceeds |
Hollow-shaft rotary platform reducer with helical gears and crossed roller bearing for low-backlash, high-load indexing.
| Published maximum | PLE economy planetary gearbox | WTN |
|---|---|---|
| Rated torque | 680 Nm | — |
| Peak torque | 1,280 Nm | — |
| Ratio (max) | 512:1 | — |
| Backlash (lower is better) | 22 arcmin | 0.5 arcmin meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What a planetary gearbox is
A planetary gearbox reduces speed and multiplies torque using a central sun gear driven by the motor, several planet gears on a carrier, and an outer ring gear. Load is shared between the planets, so the gearbox is compact, coaxial and torque-dense. A single stage typically gives ratios of about 3:1 to 10:1, and stages are combined for higher ratios. Precision servo planetaries use ground helical or spur gears, preloaded output bearings and a motor adapter flange, with backlash typically a few arcminutes or less.
When engineers choose a planetary gearbox
Choose a planetary gearbox for most servo and stepper axes that need more torque, lower reflected inertia or a better inertia match. It is efficient, typically above 95% per stage, stiff and widely available in standard frames. The trade-offs are backlash, which is low but not zero, and limited single-stage ratio. For zero backlash in a compact joint, a strain-wave gear suits better. For very high shock loads, a cycloidal reducer may be more robust.
How to specify the Neugart PLE economy planetary gearbox
Send these with your enquiry and an engineer can confirm the right PLE economy planetary gearbox variant or an equivalent:
- Ratio and output speed (:1, rpm)
- Nominal and peak output torque (Nm)
- Emergency stop torque (Nm)
- Backlash (arcmin) and torsional stiffness (Nm/arcmin)
- Radial and axial output loads (N)
- Motor flange, shaft diameter and length (mm)
- Duty cycle, mounting orientation and lubrication
Common mistakes to avoid
- Sizing on motor torque times ratio without checking acceleration torque and service factors
- Ignoring the input speed limit at high motor speeds
- Mounting a pulley or pinion that overloads the output bearing
- Forgetting the gearbox efficiency and heat in continuous duty
Neugart PLE economy planetary gearbox: frequently asked questions
Can you help replace Neugart PLE economy planetary gearbox or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including supply-network options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Neugart PLE economy planetary gearbox?
Economy in-line planetary gearbox with shaft output in frames 40 to 160 mm, ratios 3:1 to 512:1, maximum output torques up to 1,280 Nm and standard backlash from under 6 arcmin (series figures). Published series figures include speed 18,000 rpm, temperature -25 °C, temperature 90 °C, rated torque 680 Nm. It is made by Neugart GmbH (Neugart Holding GmbH, family-owned); Specify Motion can help source it or propose an equivalent.
Who makes the Neugart PLE economy planetary gearbox?
The Neugart PLE economy planetary gearbox is made by Neugart (Neugart GmbH (Neugart Holding GmbH, family-owned)) and is listed here for engineers comparing options. Specify Motion is not affiliated with Neugart GmbH (Neugart Holding GmbH, family-owned); brand names are used only to identify the product.
What is the speed of the Neugart PLE economy planetary gearbox?
The published series maximum speed is 18,000 rpm. Individual models and sizes in the PLE economy planetary gearbox range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Neugart PLE economy planetary gearbox?
We can assess suitable replacement options. On published figures, APEX Dynamics AD / ADR / ADS and Wanshsin WAE are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
How do I choose a planetary gearbox ratio?
Start from the load speed and motor speed range, then check inertia matching and torque. A ratio that brings the reflected load inertia close to the motor inertia improves dynamics. Then confirm peak output torque during acceleration is within the gearbox rating and that input speed stays under the limit.
What backlash does a precision planetary gearbox have?
Precision servo planetary gearboxes typically have backlash from below one arcminute to several arcminutes, depending on grade and stages. Lower backlash costs more. For most positioning axes, a few arcminutes is fine; for robot joints or optics, strain-wave or zero-backlash designs are used.
Further reading: How to select a planetary gearbox · Harmonic vs planetary vs cycloidal · Gearboxes and harmonic drives
Other planetary gearbox series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Neugart PLE economy planetary gearbox: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
How it works
From enquiry to delivery
Send a part number or describe the application. Our engineers take it from there: the right product, a clear quotation, and delivery and support arranged.
- 01Tell us what you needSend a part number, or configure the application, quantities and timing.
- 02An engineer reviews itWe check the specification and find the original part, a checked equivalent or a complete axis.
- 03Receive your quotationProducts, pricing, lead time and compatibility notes in one reply.
- 04Order and deliveryWhen you are happy, the order is placed and delivery and after-sales support are arranged.