Multi-axis servo drive
Aerotech Automation1 XR3 multi-axis servo drive rack
3U 19-inch rack drive for up to six axes, mixing PWM amplifiers (10 to 30 A peak) and linear amplifiers (10 A peak), with bus options to 320 VDC and 20 kHz current and servo loops.
Need this part, a replacement or a better-fit option? Our engineers help with selection, procurement, sourcing, competitive pricing and lead times.
Engineering support · Product sourcing · Procurement
Get pricing or a checked replacement
Need Aerotech parts, a replacement or another suitable option? Send your part number or describe the application. We’ll review the requirement and help with product selection, sourcing, pricing and lead times.
- Exact parts and engineer-checked alternatives
- Manufacturer-direct options where available
- Standard, modified and custom solutions
No obligation to buy. Have a datasheet, drawing or nameplate photo? Reply to your confirmation email to attach it.
Need help choosing? Build a specification →Need help choosing? Open the specification builder
Spec builder
Specify what you need instead of Automation1 XR3 multi-axis servo drive rack
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Key specifications
| Voltage (max) | 320 V |
|---|---|
| Supply | 100/120/200/240 VAC switch-selectable |
| Feedback | square-wave (40 M counts/s), sine-wave x65,536, absolute encoders |
| Fieldbus | HyperWire |
| Axes | 6 |
| Continuous current (max) | 10 A |
| Peak current (max) | 30 A |
| Servo rate | 20 kHz current and servo loop |
Summarised in our own words from Aerotech, Inc.'s published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1
Specify Motion is not affiliated with Aerotech, Inc.. Aerotech and Automation1 XR3 multi-axis servo drive rack are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Aerotech Automation1 XR3 multi-axis servo drive rack replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original Aerotech part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
AMC's analogue servo drives for centralised control schemes: set up with DIP switches and potentiometers, commanded by +/-10 V or PWM. They span 10-400 VDC and 45-265 VAC, up to 150 A continuous and 250 A peak, in PCB, panel and vehicle formats. PCB extended-environment parts run -40 to +85 C.
| Published maximum | Automation1 XR3 multi-axis servo drive rack | AxCent Analogue Servo Drives (AB, AZ, … |
|---|---|---|
| Continuous current | 10 A | 150 A meets or exceeds |
| Peak current | 30 A | 250 A meets or exceeds |
| Axes | 6 | — |
Network-capable AMC digital drives spanning 10-747 VDC and 120-480 VAC, up to 150 A continuous and 250 A peak (27.4 kW peak power), in PCB, panel, machine and vehicle formats. They support almost any motor type and feedback, plus CANopen, EtherCAT, POWERLINK and Modbus.
| Published maximum | Automation1 XR3 multi-axis servo drive rack | DigiFlex Performance Servo Drives (DP,… |
|---|---|---|
| Continuous current | 10 A | 150 A meets or exceeds |
| Peak current | 30 A | 250 A meets or exceeds |
| Power | — | 27,400 W |
| Axes | 6 | — |
ADVANCED Motion Controls' ultra-compact, high power-density digital servo drives for 10-90 VDC systems, up to 100 A continuous and 200 A peak. They come in PCB, machine-embedded, panel and development-board formats, carry STO as standard, and run EtherCAT, CANopen or Ethernet/IP. Extended-environment models are rated -40 to +95 C.
| Published maximum | Automation1 XR3 multi-axis servo drive rack | FlexPro Digital Servo Drives (FE, FX, … |
|---|---|---|
| Continuous current | 10 A | 100 A meets or exceeds |
| Peak current | 30 A | 200 A meets or exceeds |
| Axes | 6 | — |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What a multi-axis servo drive is
A multi-axis servo drive controls two or more servo motors from one unit, usually sharing a power supply, DC bus and communication interface. Formats include compact two- to four-axis drives in one housing and modular systems with a common supply module and separate axis modules. Sharing the bus lets energy from a decelerating axis be used by others, reducing braking losses. Most connect to a motion controller or PLC over EtherCAT or another industrial Ethernet network.
When engineers choose a multi-axis servo drive
Choose a multi-axis drive for machines with several coordinated servo axes in one cabinet, such as robots, packaging machines and gantries. It saves space, wiring and cost per axis compared with single drives. The trade-offs are flexibility and fault isolation: axes share the supply, so a supply fault affects all axes, and replacing one module may need specific spare strategy. Mixing very different power levels can be limited by module ranges.
How to specify the Aerotech Automation1 XR3 multi-axis servo drive rack
Send these with your enquiry and an engineer can confirm the right Automation1 XR3 multi-axis servo drive rack variant or an equivalent:
- Number of axes and power per axis (A, kW)
- Supply voltage (V AC or DC)
- Network interface and cycle time
- Motor and feedback types
- Shared bus and regenerative energy handling
- Safety functions per axis
- Cabinet size and cooling
Common mistakes to avoid
- Sizing supply module for the sum of peaks without considering simultaneous demand
- Ignoring how one fault affects all axes
- Choosing modules without room for future axes
- Overlooking network cycle time with many axes
Aerotech Automation1 XR3 multi-axis servo drive rack: frequently asked questions
Can you help replace Aerotech Automation1 XR3 multi-axis servo drive rack or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including Motion Control Products options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Aerotech Automation1 XR3 multi-axis servo drive rack?
3U 19-inch rack drive for up to six axes, mixing PWM amplifiers (10 to 30 A peak) and linear amplifiers (10 A peak), with bus options to 320 VDC and 20 kHz current and servo loops. Published series figures include voltage 320 V, axes 6, continuous current 10 A, peak current 30 A. It is made by Aerotech, Inc.; Specify Motion can help source it or propose an equivalent.
Who makes the Aerotech Automation1 XR3 multi-axis servo drive rack?
The Aerotech Automation1 XR3 multi-axis servo drive rack is made by Aerotech (Aerotech, Inc.) and is listed here for engineers comparing options. Specify Motion is not affiliated with Aerotech, Inc.; brand names are used only to identify the product.
What is the voltage of the Aerotech Automation1 XR3 multi-axis servo drive rack?
The published series maximum voltage is 320 V. Individual models and sizes in the Automation1 XR3 multi-axis servo drive rack range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Aerotech Automation1 XR3 multi-axis servo drive rack?
We can assess suitable replacement options. On published figures, ADVANCED Motion Controls AxCent Analogue Servo Drives (AB, AZ, AV, B, AVB) and ADVANCED Motion Controls DigiFlex Performance Servo Drives (DP, DZ, DV) are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
What are the benefits of a shared DC bus?
On a shared DC bus, energy regenerated by a decelerating axis can be used by other axes that are accelerating, reducing the energy dissipated in braking resistors. It also reduces wiring and supply components. Sizing must consider simultaneous peak demand on the shared supply.
Are multi-axis drives cheaper than single-axis drives?
Typically, per axis, multi-axis drives cost less and take less cabinet space, because the supply, communication and housing are shared. The saving grows with the number of axes. For machines with only one or two axes, or widely separated axes, single drives can be simpler.
Further reading: How to select a multi axis servo drive · How to select a servo drive · Servo drives
Other multi-axis servo drive series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Aerotech Automation1 XR3 multi-axis servo drive rack: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.