Spiral bevel gearbox
Nidec ABLE EVS spiral bevel gearbox
Right-angle (orthogonal axis) servo reducer in frame sizes 060 to 240, ratios 3 to 100 and allowable torque 12 to 1,920 Nm.
Need this part, a replacement or a complete package? Our experienced UK engineering team helps you select, source and obtain the right products, with pricing, delivery coordination and after-sales support.
UK engineering team · Product sourcing · Supply support
Get pricing, sourcing and replacement support
Need Nidec parts, a replacement or another suitable option? Send your part number or describe what the machine needs to do. We connect your requirement with experienced UK engineering and procurement support to help you get the right products, pricing and supply options. Your matched provider can take the enquiry through quotation and ordering to delivery and after-sales support.
- Source original parts or assess suitable alternatives
- Get pricing, lead times and a defined supply proposal
- One enquiry for components, complete axes and ongoing support
No obligation to buy. Choose the quick form below or use the full configurator on this page. Add what you know; an engineer can help with the details.
Need help choosing? Build a specification →Spec builder
Specify what you need instead of ABLE EVS
Select the products and performance you need. Our UK engineering team can use your specification to help source the right components, pricing and supply options. See your summary before adding contact details.
Already know the part number? Use the quick enquiry form. You can configure a requirement below without registering.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
Key specifications
| Ratio | 3–100:1 |
|---|---|
| Sizes | 060B, 075B, 100B, 140B, 180B, 210B, 240B |
| Allowable torque max | 1,920 |
Summarised in our own words from NIDEC CORPORATION's published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1
Notes on this data
Gear geometry of the right-angle stage not stated on the overview; classed as right-angle (spiral-bevel type) for our taxonomy.
Specify Motion is not affiliated with NIDEC CORPORATION. Nidec and ABLE EVS are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Nidec ABLE EVS replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original Nidec part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
Wanshsin right-angle planetary with a spiral bevel input stage.
| Published maximum | ABLE EVS | WADR |
|---|---|---|
| Ratio (max) | 100:1 | 200:1 meets or exceeds |
Right-angle version of the WAE precision planetary with a spiral bevel input stage.
| Published maximum | ABLE EVS | WAER |
|---|---|---|
| Ratio (max) | 100:1 | 200:1 meets or exceeds |
| Backlash (lower is better) | — | 3 arcmin |
Right-angle version of the high-rigidity WSH, with a spiral bevel stage and ratios up to 200:1.
| Published maximum | ABLE EVS | WSHR |
|---|---|---|
| Rated torque | — | 1,400 Nm |
| Peak torque | — | 4,200 Nm |
| Ratio (max) | 100:1 | 200:1 meets or exceeds |
| Backlash (lower is better) | — | 4 arcmin |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What a spiral bevel gearbox is
A spiral bevel gearbox turns the drive through 90 degrees using bevel gears with curved, spiral teeth. Curved teeth engage gradually, giving smoother, quieter running and higher load capacity than straight bevels. In servo applications, a spiral bevel stage is often combined with a planetary stage to produce a right-angle precision gearbox. Efficiency is typically high, close to that of a planetary, which makes spiral bevel units preferable to worm gears where efficiency and back-drivability matter.
When engineers choose a spiral bevel gearbox
Choose a spiral bevel gearbox when the motor must sit at right angles to the output to save space, such as on gantries, conveyors and robot arms. It gives efficient, precise right-angle transmission. The trade-offs are cost and limited single-stage ratio compared with worm gears, which reach high ratios in one stage. For self-locking or very high ratios at low cost, a worm gear may suit better, but at lower efficiency.
How to specify the Nidec ABLE EVS
Send these with your enquiry and an engineer can confirm the right ABLE EVS variant or an equivalent:
- Ratio and output speed (:1, rpm)
- Output torque, nominal and peak (Nm)
- Backlash (arcmin)
- Input speed limit (rpm)
- Output shaft or hollow bore
- Motor interface
- Radial and axial load (N)
Common mistakes to avoid
- Assuming right-angle units match inline torque ratings
- Ignoring noise at high speed
- Not checking the mounting orientation for lubrication
- Overloading the output bearing with side loads
Nidec ABLE EVS: frequently asked questions
Can you help replace Nidec ABLE EVS or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including supply-network options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Nidec ABLE EVS?
Right-angle (orthogonal axis) servo reducer in frame sizes 060 to 240, ratios 3 to 100 and allowable torque 12 to 1,920 Nm. Published series figures include ratio 3:1, ratio 100:1. It is made by NIDEC CORPORATION; Specify Motion can help source it or propose an equivalent.
Who makes the Nidec ABLE EVS?
The Nidec ABLE EVS is made by Nidec (NIDEC CORPORATION) and is listed here for engineers comparing options. Specify Motion is not affiliated with NIDEC CORPORATION; brand names are used only to identify the product.
What is the ratio of the Nidec ABLE EVS?
The published series minimum ratio is 3:1. Individual models and sizes in the ABLE EVS range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Nidec ABLE EVS?
We can assess suitable replacement options. On published figures, Wanshsin WADR and Wanshsin WAER are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
Spiral bevel or worm gearbox for a right-angle drive?
Spiral bevel gears are more efficient, run cooler and back-drive freely, which suits servo axes and dynamic motion. Worm gears offer high ratios in one stage and may resist back-driving, but efficiency falls at high ratios. Choose spiral bevel for servo performance, worm for simple low-cost holding.
Is a right-angle gearbox less precise than an inline one?
Not necessarily, but the added bevel stage typically adds a little backlash and reduces stiffness. Precision right-angle planetaries combine a spiral bevel input stage with a planetary output and publish backlash figures. Compare the right-angle unit's figures directly with the inline version.
Further reading: How to select a gearbox · How to select a planetary gearbox · Gearboxes and harmonic drives
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Nidec ABLE EVS: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
UK engineering input · A route to buying the right products
From your enquiry to products, delivery and support
Specify Motion helps turn a part number or application into a purchasing enquiry. We provide recommendations and connect your requirement with a relevant engineering or procurement provider for product selection, pricing, sourcing and supply.
- Tell us what you needSend a code or configure the application, quantities and timing.
- Reach a relevant providerAccess experienced UK engineering input and a suitable procurement route.
- Review the quotationYour provider confirms the products, price, compatibility checks and supply terms.
- Order with delivery and support agreedConfirm delivery, warranty and after-sales arrangements with the contracting provider.
You choose whether to proceed with the provider and should carry out your own checks. Website and introduction service terms.