Slip rings
Moog Packaging slip rings (F 7019, F 7170, F 8000)
Slip rings and media units for winders, flow-pack and stretch-wrapping machines, with drive and fieldbus data options.
Need this part, a replacement or a better-fit option? Our engineers help with selection, procurement, sourcing, competitive pricing and lead times.
Engineering support · Product sourcing · Procurement
Get pricing or a checked replacement
Need Moog parts, a replacement or another suitable option? Send your part number or describe the application. We’ll review the requirement and help with product selection, sourcing, pricing and lead times.
- Exact parts and engineer-checked alternatives
- Manufacturer-direct options where available
- Standard, modified and custom solutions
No obligation to buy. Have a datasheet, drawing or nameplate photo? Reply to your confirmation email to attach it.
Need help choosing? Build a specification →Need help choosing? Open the specification builder
Spec builder
Specify what you need instead of Packaging slip rings (F 7019, F 7170, F 8000)
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Key specifications
| Circuits (max) | 250 |
|---|---|
| Current per circuit (max) | 500 A |
| Voltage (max) | 800 V |
| Speed (max) | 1,000 rpm |
| Data / bus | DRIVE-CLiQ, Ethernet, PROFINET |
Summarised in our own words from Moog Inc.'s published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1
Notes on this data
F 7019 up to 250 circuits/800 V/500 A; F 7170 up to 1,000 rpm; F 8000 maintenance-free.
Specify Motion is not affiliated with Moog Inc.. Moog and Packaging slip rings (F 7019, F 7170, F 8000) are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Engineer support
Speak to our engineers about your project
Our experienced engineers are on hand, ready to help with your project. Whether you need the Moog Packaging slip rings (F 7019, F 7170, F 8000) itself, help sourcing it, or a modified or custom design built around your load, speed and space, tell us what the machine has to do and we'll come back with the right option.
- Help sourcing Packaging slip rings (F 7019, F 7170, F 8000) and spares for installed machines
- Modified and custom designs when a catalogue part doesn't fit
- Complete axis: motor, drive, gearing and feedback matched together
Typical applications
What a slip ring is
This group covers slip rings that do not fit a single standard format, including modular and split designs, contactless capacitive or optical data rings, temperature-rated units, quick-connect terminal designs, very high circuit counts and application-specific assemblies for wind turbines or packaging. All solve the same problem: transferring power, signals or data between stationary and rotating parts of a machine. What differs is the construction, which may be a split housing, a modular stack, a non-contact data path or a special material set.
When engineers choose a slip ring
Engineers look at these designs when a standard capsule, through-bore or pancake unit does not fit the job. Split rings suit retrofits onto existing shafts. Contactless data rings suit high data rates or long life without wear. Modular units allow circuit counts to change between machine variants. The trade-offs are cost, availability and, for custom designs, longer lead times and qualification. Match the construction to the real constraint, whether that is installation, data, temperature or circuit count.
How to specify the Moog Packaging slip rings (F 7019, F 7170, F 8000)
Send these with your enquiry and an engineer can confirm the right Packaging slip rings (F 7019, F 7170, F 8000) variant or an equivalent:
- What makes the application non-standard: installation, data, temperature, circuit count or format
- Circuits, current and voltage (A, V)
- Data protocols and rates
- Speed (rpm) and expected life (revolutions)
- Bore, envelope and mounting (mm)
- Temperature range (°C) and IP code
- Terminations, such as flying leads, connectors or quick-connect tabs
Common mistakes to avoid
- Choosing a special design when a standard type with minor changes would do
- Not stating the actual constraint, so the supplier offers the wrong format
- Assuming contactless data channels also carry power
- Underestimating lead time for custom or modular builds
Moog Packaging slip rings (F 7019, F 7170, F 8000): frequently asked questions
Can you help replace Moog Packaging slip rings (F 7019, F 7170, F 8000) or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including Motion Control Products options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Moog Packaging slip rings (F 7019, F 7170, F 8000)?
Slip rings and media units for winders, flow-pack and stretch-wrapping machines, with drive and fieldbus data options. Published series figures include circuits 250, current per circuit 500 A, voltage 800 V, speed 1,000 rpm. It is made by Moog Inc.; Specify Motion can help source it or propose an equivalent.
Who makes the Moog Packaging slip rings (F 7019, F 7170, F 8000)?
The Moog Packaging slip rings (F 7019, F 7170, F 8000) is made by Moog (Moog Inc.) and is listed here for engineers comparing options. Specify Motion is not affiliated with Moog Inc.; brand names are used only to identify the product.
What is the circuits of the Moog Packaging slip rings (F 7019, F 7170, F 8000)?
The published series maximum circuits is 250. Individual models and sizes in the Packaging slip rings (F 7019, F 7170, F 8000) range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Moog Packaging slip rings (F 7019, F 7170, F 8000)?
We can assess suitable replacement options. Our engineers can review the original model and propose options for your load, speed and environment. An engineer confirms the fit against your application before recommending anything.
What is a split slip ring?
A split slip ring has a rotor and housing made in two halves, so it can be fitted around an existing shaft without removing the shaft or its bearings. It suits retrofits and large machines where disassembly would be costly. Expect tighter installation tolerances and possibly a lower speed rating than a one-piece unit.
What is a contactless slip ring?
A contactless slip ring transfers data, and sometimes power, across rotation without sliding contacts, using capacitive, inductive or optical coupling. There is no wear on the data path, so life is long and very high data rates are possible. Contactless power is usually limited, so many designs combine a contactless data channel with conventional power rings.
Further reading: How to select a slip ring · How to specify a slip ring · Slip rings
Other slip rings series
Engineer support
Our engineers are ready to help with your project
Tell us about your project and how you use the Moog Packaging slip rings (F 7019, F 7170, F 8000): the load, speed, duty and environment. An experienced engineer will review it and reply, normally within one working day.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.