High-current slip rings
Rotary Systems Industrial slip ring SR004
Covered industrial slip ring rated 30 A at 600 V AC with threaded terminals, IP65 enclosure and 50 rpm maximum for slow-turning heavy equipment.
Need this part, a replacement or a better-fit option? Our engineers help with selection, procurement, sourcing, competitive pricing and lead times.
Engineering support · Product sourcing · Procurement
Get pricing or a checked replacement
Need Rotary Systems parts, a replacement or another suitable option? Send your part number or describe the application. We’ll review the requirement and help with product selection, sourcing, pricing and lead times.
- Exact parts and engineer-checked alternatives
- Manufacturer-direct options where available
- Standard, modified and custom solutions
No obligation to buy. Have a datasheet, drawing or nameplate photo? Reply to your confirmation email to attach it.
Need help choosing? Build a specification →Need help choosing? Open the specification builder
Spec builder
Specify what you need instead of Industrial slip ring SR004
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Key specifications
| Current per circuit (max) | 30 A |
|---|---|
| Voltage (max) | 600 V |
| Speed (max) | 50 rpm |
| Ingress protection | IP65 |
Summarised in our own words from Rotary Systems Inc.'s published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1
Specify Motion is not affiliated with Rotary Systems Inc.. Rotary Systems and Industrial slip ring SR004 are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Engineer support
Speak to our engineers about your project
Our experienced engineers are on hand, ready to help with your project. Whether you need the Rotary Systems Industrial slip ring SR004 itself, help sourcing it, or a modified or custom design built around your load, speed and space, tell us what the machine has to do and we'll come back with the right option.
- Help sourcing Industrial slip ring SR004 and spares for installed machines
- Modified and custom designs when a catalogue part doesn't fit
- Complete axis: motor, drive, gearing and feedback matched together
Typical applications
What a high-current slip ring is
A high-current slip ring is a rotary joint built to carry heavy power, typically tens to hundreds of amps per circuit, across continuous rotation. Instead of fine precious-metal wires, it uses wider rings in copper alloy or brass and brushes in copper graphite or silver graphite, sized to keep current density and contact heating within limits. Ring spacing and insulation are increased for higher working voltages. Many designs also carry low-level signal rings on precious-metal contacts in the same assembly, separated from the power section.
When engineers choose a high-current slip ring
Choose a high-current design when motors, heaters, magnets or welding equipment on the rotating side draw more than a standard ring can handle. It suits cranes, cable reels, welding positioners and heavy turntables. The trade-offs are size, weight, drag torque and brush dust: carbon-based brushes wear and need inspection, so maintenance access matters. Where rotation is limited to a few turns, a cable carrier or cable wrap may still be simpler. Keep sensitive signals physically separate from the power rings.
How to specify the Rotary Systems Industrial slip ring SR004
Send these with your enquiry and an engineer can confirm the right Industrial slip ring SR004 variant or an equivalent:
- Current per circuit, continuous and peak (A)
- Working voltage and required insulation level (V)
- Duty cycle and ambient temperature (°C)
- Speed, continuous and peak (rpm)
- Number of power circuits plus any signal or earth circuits
- Bore, envelope and mounting (mm)
- Brush inspection interval and maintenance access
Common mistakes to avoid
- Quoting the motor nameplate current but not the inrush or peak current at start-up
- Ignoring temperature rise in an enclosed housing, which derates current capacity
- Placing encoder or fieldbus rings right next to high-current motor feeds
- Leaving no access to inspect brushes and clean carbon dust
Rotary Systems Industrial slip ring SR004: frequently asked questions
Can you help replace Rotary Systems Industrial slip ring SR004 or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including Motion Control Products options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Rotary Systems Industrial slip ring SR004?
Covered industrial slip ring rated 30 A at 600 V AC with threaded terminals, IP65 enclosure and 50 rpm maximum for slow-turning heavy equipment. Published series figures include current per circuit 30 A, voltage 600 V, speed 50 rpm. It is made by Rotary Systems Inc.; Specify Motion can help source it or propose an equivalent.
Who makes the Rotary Systems Industrial slip ring SR004?
The Rotary Systems Industrial slip ring SR004 is made by Rotary Systems (Rotary Systems Inc.) and is listed here for engineers comparing options. Specify Motion is not affiliated with Rotary Systems Inc.; brand names are used only to identify the product.
What is the current per circuit of the Rotary Systems Industrial slip ring SR004?
The published series maximum current per circuit is 30 A. Individual models and sizes in the Industrial slip ring SR004 range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Rotary Systems Industrial slip ring SR004?
We can assess suitable replacement options. Our engineers can review the original model and propose options for your load, speed and environment. An engineer confirms the fit against your application before recommending anything.
Why do high-current slip rings use carbon brushes rather than gold contacts?
Gold-wire contacts suit low currents because they give very low noise, but they cannot carry heavy current without overheating. Copper graphite and silver graphite brushes offer a large contact area, good conductivity and self-lubrication, which handles tens to hundreds of amps. The trade-off is brush wear and dust, so these units need inspection intervals and sensible enclosure design.
How much current can one slip ring circuit carry?
It depends on ring size, brush material, speed, ambient temperature and duty. Standard capsules typically manage a few amps per ring, while dedicated high-current units are commonly rated from tens of amps to several hundred amps per circuit. Always quote continuous, peak and duty cycle together, because a ring that is fine at 50% duty may overheat when run continuously.
Further reading: How to select a slip ring · How to specify a slip ring · Slip rings
Other high-current slip rings series
Engineer support
Our engineers are ready to help with your project
Tell us about your project and how you use the Rotary Systems Industrial slip ring SR004: the load, speed, duty and environment. An experienced engineer will review it and reply, normally within one working day.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.