Slip rings
Conductix-Wampfler USR / E-USR Universal slip rings
Modular universal slip rings (USR50, USR90, USR120 built-in; E-USR50, E-USR90 enclosed) from milliamps to 200 A at up to 690 V AC or 600 V DC, 100 rpm maximum, IP00 or IP65 enclosed, with data up to 12 Mbit/s (1 Gbit/s options).
Need this part, a replacement or a better-fit option? Our engineers help with selection, procurement, sourcing, competitive pricing and lead times.
Engineering support · Product sourcing · Procurement
Get pricing or a checked replacement
Need Conductix-Wampfler parts, a replacement or another suitable option? Send your part number or describe the application. We’ll review the requirement and help with product selection, sourcing, pricing and lead times.
- Exact parts and engineer-checked alternatives
- Manufacturer-direct options where available
- Standard, modified and custom solutions
No obligation to buy. Have a datasheet, drawing or nameplate photo? Reply to your confirmation email to attach it.
Need help choosing? Build a specification →Need help choosing? Open the specification builder
Spec builder
Specify what you need instead of USR / E-USR Universal slip rings
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Key specifications
| Current per circuit (max) | 200 A |
|---|---|
| Voltage (max) | 690 V |
| Speed (max) | 100 rpm |
| Ingress protection | IP00 (USR), IP65 (E-USR) |
| Data / bus | up to 12 Mbit/s; up to 1 Gbit/s option |
| Voltage note | 690 V AC / 600 V DC |
| Options | heater, encoder, fluid rotary joint, fibre optic rotary joint |
Summarised in our own words from Delachaux Group's published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1
Specify Motion is not affiliated with Delachaux Group. Conductix-Wampfler and USR / E-USR Universal slip rings are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Conductix-Wampfler USR / E-USR Universal slip rings replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original Conductix-Wampfler part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
A small analogue power-and-signal slip ring with FASTON quick-connect terminals for fast wiring in dusty, high-cycle machinery. Optional IP65 sealing.
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What a slip ring is
This group covers slip rings that do not fit a single standard format, including modular and split designs, contactless capacitive or optical data rings, temperature-rated units, quick-connect terminal designs, very high circuit counts and application-specific assemblies for wind turbines or packaging. All solve the same problem: transferring power, signals or data between stationary and rotating parts of a machine. What differs is the construction, which may be a split housing, a modular stack, a non-contact data path or a special material set.
When engineers choose a slip ring
Engineers look at these designs when a standard capsule, through-bore or pancake unit does not fit the job. Split rings suit retrofits onto existing shafts. Contactless data rings suit high data rates or long life without wear. Modular units allow circuit counts to change between machine variants. The trade-offs are cost, availability and, for custom designs, longer lead times and qualification. Match the construction to the real constraint, whether that is installation, data, temperature or circuit count.
How to specify the Conductix-Wampfler USR / E-USR Universal slip rings
Send these with your enquiry and an engineer can confirm the right USR / E-USR Universal slip rings variant or an equivalent:
- What makes the application non-standard: installation, data, temperature, circuit count or format
- Circuits, current and voltage (A, V)
- Data protocols and rates
- Speed (rpm) and expected life (revolutions)
- Bore, envelope and mounting (mm)
- Temperature range (°C) and IP code
- Terminations, such as flying leads, connectors or quick-connect tabs
Common mistakes to avoid
- Choosing a special design when a standard type with minor changes would do
- Not stating the actual constraint, so the supplier offers the wrong format
- Assuming contactless data channels also carry power
- Underestimating lead time for custom or modular builds
Conductix-Wampfler USR / E-USR Universal slip rings: frequently asked questions
Can you help replace Conductix-Wampfler USR / E-USR Universal slip rings or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including Motion Control Products options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Conductix-Wampfler USR / E-USR Universal slip rings?
Modular universal slip rings (USR50, USR90, USR120 built-in; E-USR50, E-USR90 enclosed) from milliamps to 200 A at up to 690 V AC or 600 V DC, 100 rpm maximum, IP00 or IP65 enclosed, with data up to 12 Mbit/s (1 Gbit/s options). Published series figures include current per circuit 200 A, voltage 690 V, speed 100 rpm. It is made by Delachaux Group; Specify Motion can help source it or propose an equivalent.
Who makes the Conductix-Wampfler USR / E-USR Universal slip rings?
The Conductix-Wampfler USR / E-USR Universal slip rings is made by Conductix-Wampfler (Delachaux Group) and is listed here for engineers comparing options. Specify Motion is not affiliated with Delachaux Group; brand names are used only to identify the product.
What is the current per circuit of the Conductix-Wampfler USR / E-USR Universal slip rings?
The published series maximum current per circuit is 200 A. Individual models and sizes in the USR / E-USR Universal slip rings range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Conductix-Wampfler USR / E-USR Universal slip rings?
We can assess suitable replacement options. On published figures, Motion Control Products HR Series Faston Type Slip Ring is options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
What is a split slip ring?
A split slip ring has a rotor and housing made in two halves, so it can be fitted around an existing shaft without removing the shaft or its bearings. It suits retrofits and large machines where disassembly would be costly. Expect tighter installation tolerances and possibly a lower speed rating than a one-piece unit.
What is a contactless slip ring?
A contactless slip ring transfers data, and sometimes power, across rotation without sliding contacts, using capacitive, inductive or optical coupling. There is no wear on the data path, so life is long and very high data rates are possible. Contactless power is usually limited, so many designs combine a contactless data channel with conventional power rings.
Further reading: How to select a slip ring · How to specify a slip ring · Slip rings
Other slip rings series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Conductix-Wampfler USR / E-USR Universal slip rings: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.