Optical absolute encoder
HEIDENHAIN ECN / EQN 1300 (motor feedback) optical absolute encoder
Built-in absolute motor-feedback encoders on a tapered shaft for servo motors, available with functional safety.
Key specifications
| Outer diameter (max) | 56 mm |
|---|---|
| Resolution (max) | 25 bit |
| Accuracy | positioning accuracy down to ±20" |
| Interface | EnDat, DRIVE-CLiQ |
Summarised in our own words from DR. JOHANNES HEIDENHAIN GmbH's published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1
Notes on this data
25 bits derived; multi-turn 4096 revs; up to SIL 2 when integrated; max 115 C. Inductive ECI/EQI and KCI/KBI motor encoders also listed but not read.
Specify Motion is not affiliated with DR. JOHANNES HEIDENHAIN GmbH. HEIDENHAIN and ECN / EQN 1300 (motor feedback) are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Alternatives that meet or exceed these figures
Engineers often come to us with a HEIDENHAIN part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These 2 series from our supply network are the closest match on published figures.
Ultra-high-precision capacitive encoder with a bearing-like design, the most accurate in the range.
| Published maximum | ECN / EQN 1300 (motor feedback) | VLZ |
|---|---|---|
| Resolution | 25 bit | 26 bit meets or exceeds |
Multi-turn absolute hollow-shaft capacitive encoder that holds position through power loss, so no re-homing.
| Published maximum | ECN / EQN 1300 (motor feedback) | VLM |
|---|---|---|
| Resolution | 25 bit | 32 bit meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
What an optical absolute encoder is
An optical absolute encoder reads a unique code pattern on a disc or scale, so every position has its own digital value and position is known immediately at power-up. Single-turn encoders give position within one revolution; multi-turn encoders also count revolutions using gears or electronic counters. Position is sent over a serial interface such as SSI or BiSS, a manufacturer-specific protocol, or a fieldbus. Optical scanning gives high resolution, typically 17 bits per revolution or more in servo encoders, and good accuracy.
When engineers choose an optical absolute encoder
Choose an optical absolute encoder where knowing position at power-up matters, such as robots, machine tools, multi-axis machines and axes that cannot be homed safely. It removes homing routines and supports safety functions. The trade-offs are cost, interface compatibility and contamination sensitivity. Battery-backed multi-turn types need battery maintenance; gear or energy-harvesting types avoid that. In very dirty environments, magnetic or inductive absolute encoders may suit better.
How to specify the HEIDENHAIN ECN / EQN 1300 (motor feedback)
Send these with your enquiry and an engineer can confirm the right ECN / EQN 1300 (motor feedback) variant or an equivalent:
- Single-turn resolution (bits)
- Multi-turn range (revolutions)
- Interface: SSI, BiSS, proprietary serial or fieldbus
- Accuracy (arcsec)
- Shaft or hollow shaft size (mm)
- Speed (rpm)
- Environment and safety rating
Common mistakes to avoid
- Choosing an interface the drive does not support
- Forgetting battery maintenance on battery-backed multi-turn types
- Confusing resolution with accuracy
- Ignoring cable length limits for serial interfaces
HEIDENHAIN ECN / EQN 1300 (motor feedback): frequently asked questions
What is the HEIDENHAIN ECN / EQN 1300 (motor feedback)?
Built-in absolute motor-feedback encoders on a tapered shaft for servo motors, available with functional safety. Published series figures include outer diameter 56 mm, resolution 25 bit. It is made by DR. JOHANNES HEIDENHAIN GmbH; Specify Motion can help source it or propose an equivalent.
Who makes the HEIDENHAIN ECN / EQN 1300 (motor feedback)?
The HEIDENHAIN ECN / EQN 1300 (motor feedback) is made by HEIDENHAIN (DR. JOHANNES HEIDENHAIN GmbH) and is listed here for engineers comparing options. Specify Motion is not affiliated with DR. JOHANNES HEIDENHAIN GmbH; brand names are used only to identify the product.
What is the outer diameter of the HEIDENHAIN ECN / EQN 1300 (motor feedback)?
The published series maximum outer diameter is 56 mm. Individual models and sizes in the ECN / EQN 1300 (motor feedback) range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the HEIDENHAIN ECN / EQN 1300 (motor feedback)?
Yes. On published figures, Netzer Precision VLZ and Netzer Precision VLM are the closest match from our supply network. An engineer confirms the fit against your application before recommending anything.
What is the difference between single-turn and multi-turn absolute encoders?
A single-turn absolute encoder knows its angle within one revolution. A multi-turn absolute encoder also counts complete revolutions, so it knows total position over many turns even after power loss. Multi-turn encoders avoid homing on axes driven through screws or gears.
Which interface should an absolute encoder use?
Use the interface supported by the drive or controller. SSI is simple and widely supported, BiSS-C is an open bidirectional protocol, and several manufacturer-specific protocols are common on machine tools and servo drives. Fieldbus encoders suit PLC networks. Check cable lengths and update rates for the control loop.
Further reading: Absolute vs incremental encoders · How to select an encoder · Encoders and feedback
Other optical absolute encoder series
Spec builder
Specify what you need instead of ECN / EQN 1300 (motor feedback)
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the HEIDENHAIN ECN / EQN 1300 (motor feedback): the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.