Ironless linear motor
ETEL ILM+ ironless linear motor
Ironless linear motors in eight models for mid- to high-mass scanning, with 105 to 464 N continuous and up to 3,150 N peak force, no attraction force and optional forced-air cooling.
Need this part, a replacement or a better-fit option? Our engineers help with selection, procurement, sourcing, competitive pricing and lead times.
Engineering support · Product sourcing · Procurement
Get pricing or a checked replacement
Need ETEL parts, a replacement or another suitable option? Send your part number or describe the application. We’ll review the requirement and help with product selection, sourcing, pricing and lead times.
- Exact parts and engineer-checked alternatives
- Manufacturer-direct options where available
- Standard, modified and custom solutions
No obligation to buy. Have a datasheet, drawing or nameplate photo? Reply to your confirmation email to attach it.
Need help choosing? Build a specification →Need help choosing? Open the specification builder
Spec builder
Specify what you need instead of ILM+
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Key specifications
| Peak force (max) | 3,150 N |
|---|---|
| Continuous force (max) | 464 N |
| Cooling | Optional forced air |
Summarised in our own words from DR. JOHANNES HEIDENHAIN GmbH's published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1
Notes on this data
Headline figures on the page are 478 N continuous and 3,200 N peak; table values used.
Specify Motion is not affiliated with DR. JOHANNES HEIDENHAIN GmbH. ETEL and ILM+ are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
ETEL ILM+ replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original ETEL part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
U-channel ironless linear motors with zero cogging, six sizes from 3 N to nearly 2 kN continuous, for fast settling precision stages.
| Published maximum | ILM+ | AUM |
|---|---|---|
| Peak force | 3,150 N | 16,200 N meets or exceeds |
| Continuous force | 464 N | 1,980 N meets or exceeds |
| Speed | — | 5 m/s |
Vacuum-compatible ironless linear motors with high motor constant and zero cogging, six sizes.
| Published maximum | ILM+ | AWM |
|---|---|---|
| Peak force | 3,150 N | 3,845.3 N meets or exceeds |
| Continuous force | 464 N | 769.1 N meets or exceeds |
| Speed | — | 5 m/s |
High-force iron-core linear motors in five widths with optional water cooling, reaching several kN continuous.
| Published maximum | ILM+ | AKM |
|---|---|---|
| Peak force | 3,150 N | 12,884.3 N meets or exceeds |
| Continuous force | 464 N | 6,190.1 N meets or exceeds |
| Speed | — | 5 m/s |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What an ironless linear motor is
An ironless linear motor, also called a coreless or U-channel linear motor, has a coil assembly with no iron, typically encapsulated in epoxy, moving inside a U-shaped channel lined with magnets on both sides. With no iron in the moving part, there is no cogging and no magnetic attraction between forcer and track. The forcer is light, so acceleration can be very high. Like other linear motors, it drives the load directly and relies on a linear encoder and external guides.
When engineers choose an ironless linear motor
Choose an ironless linear motor for very smooth motion, constant velocity and fast settling with light to moderate loads, such as scanning, metrology, semiconductor and inspection. The trade-offs are force density and heat: without an iron core, continuous force per size is lower and the coil has less thermal mass. The U-channel track is also bulkier and more expensive per metre. For heavy loads or high continuous force, an iron-core design is usually more economical.
How to specify the ETEL ILM+
Send these with your enquiry and an engineer can confirm the right ILM+ variant or an equivalent:
- Peak and continuous force (N)
- Moving mass and payload (kg)
- Velocity ripple or smoothness requirement
- Stroke and speed (mm, m/s)
- Settling time and positioning accuracy (ms, µm)
- Thermal limits and cooling
- Encoder type and resolution
Common mistakes to avoid
- Using peak force for continuous duty and overheating the coil
- Ignoring cable management on a moving coil
- Assuming guides can be lighter without considering stiffness
- Choosing ironless where an iron-core motor would provide more force for less cost
ETEL ILM+: frequently asked questions
Can you help replace ETEL ILM+ or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including Motion Control Products options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the ETEL ILM+?
Ironless linear motors in eight models for mid- to high-mass scanning, with 105 to 464 N continuous and up to 3,150 N peak force, no attraction force and optional forced-air cooling. Published series figures include peak force 3,150 N, continuous force 464 N. It is made by DR. JOHANNES HEIDENHAIN GmbH; Specify Motion can help source it or propose an equivalent.
Who makes the ETEL ILM+?
The ETEL ILM+ is made by ETEL (DR. JOHANNES HEIDENHAIN GmbH) and is listed here for engineers comparing options. Specify Motion is not affiliated with DR. JOHANNES HEIDENHAIN GmbH; brand names are used only to identify the product.
What is the peak force of the ETEL ILM+?
The published series maximum peak force is 3,150 N. Individual models and sizes in the ILM+ range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the ETEL ILM+?
We can assess suitable replacement options. On published figures, Akribis Systems AUM and Akribis Systems AWM are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
Why do ironless linear motors have no cogging?
Cogging comes from iron being attracted to individual magnets as it passes over them. An ironless forcer has no iron in the moving part, so there is nothing to be pulled towards the magnets and the force is smooth. This gives very low velocity ripple, which suits scanning and precise constant-speed motion.
Are ironless linear motors less powerful?
For a given size, ironless motors typically produce less continuous force than iron-core motors and have less thermal mass to absorb heat. Their light forcers allow very high acceleration, so the moving system can still be very dynamic. For heavy loads, iron-core motors are often more economical.
Further reading: How to select a linear motor · Linear actuators
Other ironless linear motor series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the ETEL ILM+: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.