Remote I/O
WAGO 750 XTR and PFC200 XTR remote I/O
Extreme-environment versions of the 750 I/O system and PFC200 controller rated -40 to +70 °C without extra protection, vibration-proof to 5 g, 5 kV impulse isolation and approved to 5,000 m altitude.
Need this part, a replacement or a better-fit option? Our engineers help with selection, procurement, sourcing, competitive pricing and lead times.
Engineering support · Product sourcing · Procurement
Get pricing or a checked replacement
Need WAGO parts, a replacement or another suitable option? Send your part number or describe the application. We’ll review the requirement and help with product selection, sourcing, pricing and lead times.
- Exact parts and engineer-checked alternatives
- Manufacturer-direct options where available
- Standard, modified and custom solutions
No obligation to buy. Have a datasheet, drawing or nameplate photo? Reply to your confirmation email to attach it.
Need help choosing? Build a specification →Need help choosing? Open the specification builder
Spec builder
Specify what you need instead of WAGO 750 XTR and PFC200 XTR
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Key specifications
| Temperature | -40–70 °C |
|---|---|
| Data / bus | Ethernet, CANopen, PROFIBUS DP, IEC 60870-5-101/103/104, IEC 61850, DNP3 |
| Fieldbus | 2 x Ethernet, RS-232/485; variant with CAN, CANopen, PROFIBUS DP slave |
| Vibration | up to 5 g |
| Altitude m max | 5,000 |
| Isolation | impulse voltage up to 5 kV |
| Programming | CODESYS 2 and 3 on real-time Linux |
Summarised in our own words from WAGO GmbH & Co. KG's published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1 · Source 2
Specify Motion is not affiliated with WAGO GmbH & Co. KG. WAGO and WAGO 750 XTR and PFC200 XTR are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
WAGO 750 XTR and PFC200 XTR replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original WAGO part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
Slim remote/expansion I/O system (24 mm coupler, 12 mm modules) with digital, analogue, RTD and thermocouple modules on a 100 Mbps LVDS backplane.
IoT gateway with 800 MHz CPU, dual Ethernet, COM ports, Wi-Fi/4G options and over 300 industrial protocols, pushing data to the cloud via MQTT.
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What a remote I/O is
Remote I/O places input and output modules near sensors and actuators on the machine, connected to the main controller over a fieldbus or industrial Ethernet network. A coupler or bus head handles communication, and plug-in modules provide digital, analogue, temperature or special-function channels. This replaces long multi-core cables back to the cabinet with a single network cable. Remote I/O comes in cabinet-mounted DIN-rail formats and sealed IP67 blocks that mount directly on the machine frame.
When engineers choose a remote I/O
Choose remote I/O for large or modular machines, distributed systems and retrofits, where wiring every signal back to the cabinet would be costly. It reduces cable runs and installation time. The trade-offs are network dependency and diagnostics planning: a network fault can affect many signals, and protocols must match the controller. For small compact machines, local I/O on the PLC may be simpler.
How to specify the WAGO 750 XTR and PFC200 XTR
Send these with your enquiry and an engineer can confirm the right WAGO 750 XTR and PFC200 XTR variant or an equivalent:
- Network protocol and coupler
- I/O count and types
- Signal levels and isolation
- Mounting: DIN rail or IP67
- Expansion module limits
- Diagnostics and status
- Supply voltage
Common mistakes to avoid
- Choosing a coupler that does not support the controller's network
- Ignoring maximum module count per coupler
- Placing IP20 modules in machine areas
- Leaving out network diagnostics
WAGO 750 XTR and PFC200 XTR: frequently asked questions
Can you help replace WAGO 750 XTR and PFC200 XTR or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including Motion Control Products options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the WAGO 750 XTR and PFC200 XTR?
Extreme-environment versions of the 750 I/O system and PFC200 controller rated -40 to +70 °C without extra protection, vibration-proof to 5 g, 5 kV impulse isolation and approved to 5,000 m altitude. Published series figures include temperature -40 °C, temperature 70 °C. It is made by WAGO GmbH & Co. KG; Specify Motion can help source it or propose an equivalent.
Who makes the WAGO 750 XTR and PFC200 XTR?
The WAGO 750 XTR and PFC200 XTR is made by WAGO (WAGO GmbH & Co. KG) and is listed here for engineers comparing options. Specify Motion is not affiliated with WAGO GmbH & Co. KG; brand names are used only to identify the product.
What is the temperature of the WAGO 750 XTR and PFC200 XTR?
The published series minimum temperature is -40 °C. Individual models and sizes in the WAGO 750 XTR and PFC200 XTR range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the WAGO 750 XTR and PFC200 XTR?
We can assess suitable replacement options. On published figures, Kinco RP20 and Kinco GW01 gateway are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
What are the benefits of remote I/O?
Remote I/O reduces wiring by placing modules near sensors and actuators and connecting them over one network cable. It speeds installation, simplifies modular machines and improves diagnostics. It does depend on network reliability, so plan topology, redundancy where needed and diagnostics carefully.
What is the difference between IP20 and IP67 remote I/O?
IP20 remote I/O is designed for mounting inside an enclosure on DIN rail. IP67 remote I/O is sealed for direct mounting on the machine, with M8 or M12 connectors, so it can sit close to devices without a cabinet. Choose by mounting location and environment.
Further reading: How to select an hmi and remote io · Controllers and PLCs
Other remote i/o series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the WAGO 750 XTR and PFC200 XTR: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.