Rodless belt actuator
Parker Hannifin OSP-E rodless belt actuator
Rodless linear actuator family built on the OSP profile, in belt (B, BHD) and ball or trapezoidal screw (SB, ST) versions; series maximum 15,000 N load (BHD), 3,120 N thrust, 5 m/s and about 5,675 mm stroke, IP54.
Need this part, a replacement or a better-fit option? Our engineers help with selection, procurement, sourcing, competitive pricing and lead times.
Engineering support · Product sourcing · Procurement
Get pricing or a checked replacement
Need Parker Hannifin parts, a replacement or another suitable option? Send your part number or describe the application. We’ll review the requirement and help with product selection, sourcing, pricing and lead times.
- Exact parts and engineer-checked alternatives
- Manufacturer-direct options where available
- Standard, modified and custom solutions
No obligation to buy. Have a datasheet, drawing or nameplate photo? Reply to your confirmation email to attach it.
Need help choosing? Build a specification →Need help choosing? Open the specification builder
Spec builder
Specify what you need instead of OSP-E
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Key specifications
| Ingress protection | IP54 |
|---|---|
| Force (max) | 3,120 N |
| Stroke (max) | 5,675 mm |
| Linear speed (max) | 5,000 mm/s |
| Linear speed (max) | 5 m/s |
| Screw type | toothed belt (B, BHD), ball screw (SB) or trapezoidal screw (ST) |
| Load max | 15,000 |
Summarised in our own words from Parker-Hannifin Corporation's published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1
Notes on this data
Screw versions: SB up to 1.25 m/s and 3,200 mm; ST up to 2,500 N thrust, 10% duty.
Specify Motion is not affiliated with Parker-Hannifin Corporation. Parker Hannifin and OSP-E are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Engineer support
Speak to our engineers about your project
Our experienced engineers are on hand, ready to help with your project. Whether you need the Parker Hannifin OSP-E itself, help sourcing it, or a modified or custom design built around your load, speed and space, tell us what the machine has to do and we'll come back with the right option.
- Help sourcing OSP-E and spares for installed machines
- Modified and custom designs when a catalogue part doesn't fit
- Complete axis: motor, drive, gearing and feedback matched together
Typical applications
What a rodless belt actuator is
A rodless belt actuator moves a carriage along an aluminium profile using a toothed belt driven by a pulley at one end. The load mounts on the carriage, which runs on internal bearings or profile rails, so the unit carries and guides the load. Because the belt does not whip like a long screw, stroke can be long, typically several metres, and speeds are high. Belt drives are less stiff than screws, so they suit fast transfer more than high-force pushing.
When engineers choose a rodless belt actuator
Choose a belt actuator for long strokes, high speed and lighter thrust loads, such as transfer axes, gantries and pick-and-place over distance. The trade-offs are stiffness, thrust and accuracy: belt stretch reduces stiffness and repeatability compared with screw drives, and vertical axes need a brake and careful sizing. For high thrust or tight positioning at short stroke, a screw rodless actuator is usually a better fit.
How to specify the Parker Hannifin OSP-E
Send these with your enquiry and an engineer can confirm the right OSP-E variant or an equivalent:
- Payload mass and moment loads (kg, Nm)
- Stroke (mm or m)
- Speed and acceleration (m/s, m/s²)
- Positioning repeatability (mm)
- Thrust force needed (N)
- Orientation and any vertical axis requirements
- Motor mounting, gearbox and environment
Common mistakes to avoid
- Forgetting belt tension and stretch when tight repeatability is needed
- Using a belt actuator for pressing or high thrust tasks
- Ignoring reflected inertia and gearbox ratio on high-acceleration axes
- Mounting the profile unsupported over long spans
Parker Hannifin OSP-E: frequently asked questions
Can you help replace Parker Hannifin OSP-E or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including Motion Control Products options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Parker Hannifin OSP-E?
Rodless linear actuator family built on the OSP profile, in belt (B, BHD) and ball or trapezoidal screw (SB, ST) versions; series maximum 15,000 N load (BHD), 3,120 N thrust, 5 m/s and about 5,675 mm stroke, IP54. Published series figures include force 3,120 N, stroke 5,675 mm, linear speed 5,000 mm/s, linear speed 5 m/s. It is made by Parker-Hannifin Corporation; Specify Motion can help source it or propose an equivalent.
Who makes the Parker Hannifin OSP-E?
The Parker Hannifin OSP-E is made by Parker Hannifin (Parker-Hannifin Corporation) and is listed here for engineers comparing options. Specify Motion is not affiliated with Parker-Hannifin Corporation; brand names are used only to identify the product.
What is the force of the Parker Hannifin OSP-E?
The published series maximum force is 3,120 N. Individual models and sizes in the OSP-E range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Parker Hannifin OSP-E?
We can assess suitable replacement options. Our engineers can review the original model and propose options for your load, speed and environment. An engineer confirms the fit against your application before recommending anything.
How long can a belt-driven linear actuator be?
Belt actuators commonly reach several metres of stroke from one profile, and longer strokes are possible with joined profiles. The limits are profile stiffness, belt stretch, support spacing and the moment loads on the carriage. Long axes need regular supports along their length to avoid sag.
How accurate is a belt-driven actuator?
Repeatability on belt actuators is typically in the region of a tenth of a millimetre, depending on belt type, tension and load, which is coarser than screw drives. Accuracy is affected by belt stretch and pulley tolerances. For better accuracy, add linear encoder feedback or choose a screw drive.
Further reading: Rodless belt vs screw actuators · How to size a linear actuator · Linear actuators
Other rodless belt actuator series
Engineer support
Our engineers are ready to help with your project
Tell us about your project and how you use the Parker Hannifin OSP-E: the load, speed, duty and environment. An experienced engineer will review it and reply, normally within one working day.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.