Integrated stepper motor
Lin Engineering Silverpak 23C / 23CE integrated stepper motor
NEMA 23 stepper with built-in driver and controller for 12 to 40 V DC, 0.3 to 3.0 A peak per phase, RS-485 and step/direction inputs, and an optional encoder up to 5,000 counts per revolution with position correction.
Need this part, a replacement or a better-fit option? Our engineers help with selection, procurement, sourcing, competitive pricing and lead times.
Engineering support · Product sourcing · Procurement
Get pricing or a checked replacement
Need Lin Engineering parts, a replacement or another suitable option? Send your part number or describe the application. We’ll review the requirement and help with product selection, sourcing, pricing and lead times.
- Exact parts and engineer-checked alternatives
- Manufacturer-direct options where available
- Standard, modified and custom solutions
No obligation to buy. Have a datasheet, drawing or nameplate photo? Reply to your confirmation email to attach it.
Need help choosing? Build a specification →Need help choosing? Open the specification builder
Spec builder
Specify what you need instead of Silverpak 23C / 23CE integrated stepper
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Key specifications
| Voltage (max) | 40 V |
|---|---|
| Data / bus | RS-485, step/direction (opto-isolated) |
| Supply | 12–40 V DC |
| Feedback | quadrature encoder, up to 1,250 cycles / 5,000 counts per rev (CE version) |
| Current (max) | 3 A |
| Holding torque | 0.63–2.01 Nm |
| NEMA sizes | 23 |
Summarised in our own words from Lin Engineering's published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1 · Source 2
Notes on this data
Holding torque from the series list (88.9 to 284.16 oz-in); the product guide table on the page gives 37.5 to 273.6 oz-in, so confirm per model. NEMA 17 Silverpak 17C/17D versions also exist.
Specify Motion is not affiliated with Lin Engineering. Lin Engineering and Silverpak 23C / 23CE integrated stepper are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Lin Engineering Silverpak 23C / 23CE integrated stepper replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original Lin Engineering part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
Closed-loop integrated stepper (motor, 14-bit encoder and drive) with pulse/direction input, NEMA 17-24 up to 3.5 Nm.
| Published maximum | Silverpak 23C / 23CE integrated stepper | Leadshine iCS Series |
|---|---|---|
| Holding torque | 2.01 Nm | 3.5 Nm meets or exceeds |
| Current | 3 A | 7 A meets or exceeds |
Open-loop stepper motor with built-in drive, pulse/direction controlled, in NEMA 17, 23 and 24 up to 3.5 Nm.
| Published maximum | Silverpak 23C / 23CE integrated stepper | Leadshine iEM Series |
|---|---|---|
| Holding torque | 2.01 Nm | 3.5 Nm meets or exceeds |
| Current | 3 A | 7 A meets or exceeds |
Integrated stepper with drive, optional controller and hMT closed-loop technology, in NEMA 17/23/34, available as pulse/direction, RS-422/485 motion control, CANopen or multi-protocol Ethernet versions.
| Published maximum | Silverpak 23C / 23CE integrated stepper | Novanta IMS Liberty MDrive (LMD / LMH) |
|---|---|---|
| Holding torque | 2.01 Nm | 6.5 Nm meets or exceeds |
| Current | 3 A | 3.5 A meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What an integrated stepper motor is
An integrated stepper motor combines a hybrid stepper, its drive and often a motion controller in a single housing, sometimes with an encoder for closed-loop operation. The unit connects directly to a DC supply and a command interface, which may be pulse and direction, analogue, Modbus, CANopen or industrial Ethernet. Integration removes the separate drive and motor cable, reducing cabinet space and wiring, and some units can store and run simple motion programs on their own.
When engineers choose an integrated stepper motor
Choose an integrated stepper for compact or distributed machines with many small axes, such as format changeover, laboratory automation and small conveyors. Fewer components simplify assembly and reduce wiring faults. The trade-offs are heat and flexibility: electronics on the motor raise local temperature, and the whole unit is replaced on a fault. For high-power steppers or hot environments, separate drives are usually more practical.
How to specify the Lin Engineering Silverpak 23C / 23CE integrated stepper
Send these with your enquiry and an engineer can confirm the right Silverpak 23C / 23CE integrated stepper variant or an equivalent:
- Holding torque and torque at speed (Nm, rpm)
- Frame size (NEMA or mm)
- Supply voltage (V DC)
- Control interface and protocol
- Open or closed loop
- I/O count and stored program capability
- IP code and ambient temperature (°C)
Common mistakes to avoid
- Mounting in a hot spot and derating the electronics
- Choosing the wrong protocol variant for the controller
- Ignoring cable routing and connector orientation
- Overlooking supply sizing for many axes at once
Lin Engineering Silverpak 23C / 23CE integrated stepper: frequently asked questions
Can you help replace Lin Engineering Silverpak 23C / 23CE integrated stepper or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including Motion Control Products options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Lin Engineering Silverpak 23C / 23CE integrated stepper?
NEMA 23 stepper with built-in driver and controller for 12 to 40 V DC, 0.3 to 3.0 A peak per phase, RS-485 and step/direction inputs, and an optional encoder up to 5,000 counts per revolution with position correction. Published series figures include voltage 40 V, current 3 A, holding torque 0.63 Nm, holding torque 2.01 Nm. It is made by Lin Engineering; Specify Motion can help source it or propose an equivalent.
Who makes the Lin Engineering Silverpak 23C / 23CE integrated stepper?
The Lin Engineering Silverpak 23C / 23CE integrated stepper is made by Lin Engineering and is listed here for engineers comparing options. Specify Motion is not affiliated with Lin Engineering; brand names are used only to identify the product.
What is the voltage of the Lin Engineering Silverpak 23C / 23CE integrated stepper?
The published series maximum voltage is 40 V. Individual models and sizes in the Silverpak 23C / 23CE integrated stepper range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Lin Engineering Silverpak 23C / 23CE integrated stepper?
We can assess suitable replacement options. On published figures, Leadshine iCS Series and Leadshine iEM Series are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
What are the benefits of an integrated stepper motor?
An integrated stepper reduces wiring, cabinet space and assembly time because the drive is built into the motor. It also shortens motor cables, which helps EMC. This suits distributed and modular machines with many small axes. The trade-off is that the electronics share the motor environment.
Can an integrated stepper run without a PLC?
Many integrated steppers can store simple motion programs and respond to digital inputs, so they can run standalone for basic tasks such as indexing or speed control. For coordinated multi-axis machines, a PLC or motion controller usually commands them over a fieldbus.
Further reading: How to select a stepper motor · Closed loop stepper motors explained · Servo and stepper motors
Other integrated stepper motor series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Lin Engineering Silverpak 23C / 23CE integrated stepper: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.