Strain-wave (harmonic) gear
Laifual Drive FSS (FS standard) strain-wave (harmonic) gear
Cup-type strain-wave gear in sizes 5 to 40 with ratios 50–160, rated 0.4–294 Nm, 647 Nm start/stop peak and 1,180 Nm momentary (series maximum), and backlash of 20 arcsec or less from size 14; Laifual lists it as the CSF-equivalent standard type.
Need this part, a replacement or a better-fit option? Our engineers help with selection, procurement, sourcing, competitive pricing and lead times.
Engineering support · Product sourcing · Procurement
Get pricing or a checked replacement
Need Laifual Drive parts, a replacement or another suitable option? Send your part number or describe the application. We’ll review the requirement and help with product selection, sourcing, pricing and lead times.
- Exact parts and engineer-checked alternatives
- Manufacturer-direct options where available
- Standard, modified and custom solutions
No obligation to buy. Have a datasheet, drawing or nameplate photo? Reply to your confirmation email to attach it.
Need help choosing? Build a specification →Need help choosing? Open the specification builder
Spec builder
Specify what you need instead of FSS (FS standard)
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Key specifications
| Rated torque | 0.4–294 Nm |
|---|---|
| Peak torque (max) | 647 Nm |
| Ratio | 50–160:1 |
| Backlash (max) | 1 arcmin |
| Sizes | 5, 8, 11, 14, 17, 20, 25, 32, 40 |
| Rated life | 15,000 h |
| Momentary torque max | 1,180 |
| Max input | 10,000 |
| Backlash | ≤60 arcsec size 5, ≤30 arcsec sizes 8–11, ≤20 arcsec sizes 14–40 |
| Structure | cup-type flexspline |
Summarised in our own words from Zhejiang Laifual Harmonic Drive Co., Ltd. (HKEX: 03952)'s published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1 · Source 2
Notes on this data
Rated torque at 2,000 rpm input. Design life 10,000 h (sizes 5–11 and ratio 50) or 15,000 h.
Specify Motion is not affiliated with Zhejiang Laifual Harmonic Drive Co., Ltd. (HKEX: 03952). Laifual Drive and FSS (FS standard) are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Laifual Drive FSS (FS standard) replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original Laifual Drive part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
Ultra-flat cup-type strain-wave gear with a very short axial length, light weight and high stiffness for its size.
| Published maximum | FSS (FS standard) | LCD |
|---|---|---|
| Rated torque | 294 Nm | — |
| Peak torque | 647 Nm | — |
| Ratio (max) | 160:1 | 500:1 meets or exceeds |
| Backlash (lower is better) | 1 arcmin | — |
Cup-type strain-wave gear component sets for building your own joint; the LCSG high-torque version lifts capacity by around 30% over the standard LCS.
| Published maximum | FSS (FS standard) | LCS / LCSG |
|---|---|---|
| Rated torque | 294 Nm | — |
| Peak torque | 647 Nm | — |
| Ratio (max) | 160:1 | 500:1 meets or exceeds |
| Backlash (lower is better) | 1 arcmin | — |
Ultra-flat hollow-shaft strain-wave gear, combining a very low axial height with a through-bore for wiring.
| Published maximum | FSS (FS standard) | LHD |
|---|---|---|
| Rated torque | 294 Nm | — |
| Peak torque | 647 Nm | — |
| Ratio (max) | 160:1 | 500:1 meets or exceeds |
| Backlash (lower is better) | 1 arcmin | — |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What a strain-wave (harmonic) gear is
A strain-wave gear, often called a harmonic gear, reduces speed using three parts: an elliptical wave generator, a thin flexible toothed cup or hat called the flexspline, and a rigid circular spline with internal teeth. The wave generator deforms the flexspline so its teeth engage the circular spline at two points. Because the flexspline has typically two fewer teeth, each input turn advances it slightly, giving ratios of about 30:1 to 160:1 in one stage, with near-zero backlash.
When engineers choose a strain-wave (harmonic) gear
Choose a strain-wave gear for compact, lightweight, high-ratio reduction with near-zero backlash, such as robot joints, cobots, medical robots, aerospace and optics. Hollow versions allow cables through the centre. The trade-offs are torsional stiffness at low load, which is lower than some alternatives, limited input speed and the risk of tooth ratcheting under overload. For shock loads and heavy base joints, cycloidal reducers are often preferred.
How to specify the Laifual Drive FSS (FS standard)
Send these with your enquiry and an engineer can confirm the right FSS (FS standard) variant or an equivalent:
- Ratio (:1)
- Rated, peak and momentary torque (Nm)
- Input speed limits (rpm)
- Torsional stiffness (Nm/arcmin)
- Hysteresis and accuracy (arcmin)
- Component set or housed unit
- Hollow shaft diameter and output bearing loads
Common mistakes to avoid
- Exceeding momentary torque and ratcheting the teeth
- Ignoring low-load stiffness in precision control
- Poor housing tolerances for component sets
- Using the wrong lubricant or quantity
Laifual Drive FSS (FS standard): frequently asked questions
Can you help replace Laifual Drive FSS (FS standard) or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including Motion Control Products options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Laifual Drive FSS (FS standard)?
Cup-type strain-wave gear in sizes 5 to 40 with ratios 50–160, rated 0.4–294 Nm, 647 Nm start/stop peak and 1,180 Nm momentary (series maximum), and backlash of 20 arcsec or less from size 14; Laifual lists it as the CSF-equivalent standard type. Published series figures include rated torque 0.4 Nm, rated torque 294 Nm, peak torque 647 Nm, ratio 50:1. It is made by Zhejiang Laifual Harmonic Drive Co., Ltd. (HKEX: 03952); Specify Motion can help source it or propose an equivalent.
Who makes the Laifual Drive FSS (FS standard)?
The Laifual Drive FSS (FS standard) is made by Laifual Drive (Zhejiang Laifual Harmonic Drive Co., Ltd. (HKEX: 03952)) and is listed here for engineers comparing options. Specify Motion is not affiliated with Zhejiang Laifual Harmonic Drive Co., Ltd. (HKEX: 03952); brand names are used only to identify the product.
What is the rated torque of the Laifual Drive FSS (FS standard)?
The published series minimum rated torque is 0.4 Nm. Individual models and sizes in the FSS (FS standard) range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Laifual Drive FSS (FS standard)?
We can assess suitable replacement options. On published figures, LeaderDrive LCD and LeaderDrive LCS / LCSG are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
Why do strain-wave gears have near-zero backlash?
The flexspline teeth are preloaded into the circular spline teeth by the elliptical wave generator, and many teeth engage at once. There is no clearance between teeth at the engagement zones, so backlash is close to zero. Lost motion comes mainly from elastic deflection.
What is the difference between a strain-wave component set and a housed unit?
A component set is the wave generator, flexspline and circular spline, which the machine builder mounts in its own housing with bearings. A housed unit adds a housing, output bearing and seals. Component sets save weight and space; housed units are easier to integrate.
Further reading: Harmonic vs planetary vs cycloidal · How to select a gearbox · Gearboxes and harmonic drives
Other strain-wave (harmonic) gear series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Laifual Drive FSS (FS standard): the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.