DC servo drive
FAULHABER MC motion controllers (MC 3001 / 3602 / 3603 / 3606 / 5004 / 5005 / 5010)
Compact single-axis motion controllers for Faulhaber DC, brushless and linear motors, from PCB-mounted modules to housed units with CANopen and EtherCAT.
Key specifications
| Supply | 6-50 Vdc (6-30 V MC 3001; 6-36 V MC 36xx; 12-50 V MC 50xx) |
|---|---|
| Fieldbus | RS232, CANopen, EtherCAT |
| Axes | 1 |
| Continuous current (max) | 10 A |
Summarised in our own words from Dr. Fritz Faulhaber GmbH & Co. KG's published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1 · Source 2
Notes on this data
Continuous current 1 A (MC 3001 B) to 10 A (MC 5010 S). MC 3602 B and MC 3606 B marked new. EtherCAT on some models via add-on module. Peak currents not published on the overview page.
Specify Motion is not affiliated with Dr. Fritz Faulhaber GmbH & Co. KG. FAULHABER and MC motion controllers (MC 3001 / 3602 / 3603 / 3606 / 5004 / 5005 / 5010) are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Alternatives that meet or exceed these figures
Engineers often come to us with a FAULHABER part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These 3 series from our supply network are the closest match on published figures.
Single-axis 24-70 VDC servo drives from 5 to 60 Arms (180 A peak), in RS (Modbus/pulse/analogue) and CAN (CANopen/analogue) versions. They drive brushless, brushed and PMSM motors including ELVM, with STO SIL3 and backup logic supply on the 40/60 A models.
| Published maximum | MC motion controllers (MC 3001 / 3602 / 3603 / 3606 / 5004 / 5005 / 5010) | ELD2 Series Low-Voltage DC Servo Drives |
|---|---|---|
| Continuous current | 10 A | 60 A meets or exceeds |
| Peak current | — | 180 A |
| Power | — | 2,500 W |
| Axes | 1 | 1 meets or exceeds |
Palm-sized 24-70 VDC servo drives (76 x 50 x 33.5 mm) from 50 to 750 W in EtherCAT, CANopen and Modbus RTU versions, with STO, a second encoder input for full closed loop and support for slotless, brushed, voice-coil and linear motors.
| Published maximum | MC motion controllers (MC 3001 / 3602 / 3603 / 3606 / 5004 / 5005 / 5010) | ELD3 Series Miniature DC Servo Drives |
|---|---|---|
| Continuous current | 10 A | 20 A meets or exceeds |
| Peak current | — | 50 A |
| Power | — | 750 W |
| Axes | 1 | 1 meets or exceeds |
Palm-sized Kinco 24-60 VDC drives at 5, 10 or 20 Arms for 50-750 W BLDC servo motors, with RS485, CANopen or EtherCAT, used heavily in AGVs.
| Published maximum | MC motion controllers (MC 3001 / 3602 / 3603 / 3606 / 5004 / 5005 / 5010) | OD Series Mini DC Servo Drives (OD114S… |
|---|---|---|
| Continuous current | 10 A | 20 A meets or exceeds |
| Power | — | 750 W |
| Axes | 1 | 1 meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Other dc servo drive series
Spec builder
Specify what you need instead of MC motion controllers (MC 3001 / 3602 / 3603 / 3606 / 5004 / 5005 / 5010)
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the FAULHABER MC motion controllers (MC 3001 / 3602 / 3603 / 3606 / 5004 / 5005 / 5010): the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.