Tubular linear motor
LinMot P02-23 S (P02-23Sx80F-HP)
A slim 23 mm tubular linear motor in LinMot's P02 range, sold alongside the PS01-23x80 HP stators. It is built for small, fast strokes where space is tight.
Key specifications
| Peak force (max) | 67.1 N |
|---|---|
| Continuous force (max) | 24 N |
| Stroke (max) | 780 mm |
| Linear speed (max) | 7.3 m/s |
Summarised in our own words from NTI AG's published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1 · Source 2 · Source 3
Notes on this data
linmot.com lists P02-23 S as 67.1 N max and 24 N sustained over 780 mm. The eCatalog shows 67 N and 13/24 N continuous. The motor IP rating is not stated; the connector is IP67. LinMot publishes P02 only in the 23 mm size shown here; no other P02 sizes were found on the pages checked.
Specify Motion is not affiliated with NTI AG. LinMot and P02-23 S (P02-23Sx80F-HP) are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Alternatives that meet or exceed these figures
Engineers often come to us with a LinMot part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These 3 series from our supply network are the closest match on published figures.
Linear motor and stage modules with the magnets in the moving forcer and a passive steel track, giving low EMI, low attraction and cheap long travel.
| Published maximum | P02-23 S (P02-23Sx80F-HP) | MMF4 / MMD Magnet-free Track Linear Mo… |
|---|---|---|
| Peak force | 67.1 N | 1,124 N meets or exceeds |
| Continuous force | 24 N | 456 N meets or exceeds |
| Speed | 7.3 m/s | — |
| Stroke | 780 mm | 3,000 mm meets or exceeds |
Narrow, cost-effective iron-core linear motors with low cogging for long-stroke, space-constrained axes.
| Published maximum | P02-23 S (P02-23Sx80F-HP) | AQM |
|---|---|---|
| Peak force | 67.1 N | 1,243 N meets or exceeds |
| Continuous force | 24 N | 506 N meets or exceeds |
| Speed | 7.3 m/s | 5 m/s |
| Stroke | 780 mm | 100,000 mm meets or exceeds |
U-channel ironless linear motors with zero cogging, six sizes from 3 N to nearly 2 kN continuous, for fast settling precision stages.
| Published maximum | P02-23 S (P02-23Sx80F-HP) | AUM |
|---|---|---|
| Peak force | 67.1 N | 16,200 N meets or exceeds |
| Continuous force | 24 N | 1,980 N meets or exceeds |
| Speed | 7.3 m/s | 5 m/s |
| Stroke | 780 mm | — |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Other tubular linear motor series
Spec builder
Specify what you need instead of P02-23 S (P02-23Sx80F-HP)
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the LinMot P02-23 S (P02-23Sx80F-HP): the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.