Motion controller
Leadshine MC500 (MC508CS / MC516CS / MC532CS)
CODESYS-based PLC/motion controller with EtherCAT for 8, 16 or 32 axes plus 6 local pulse axes, dual-core SOC+FPGA and 32-module R2 I/O expansion.
Key specifications
| Axes max | 32 |
|---|---|
| Pulse axes | 6 x 200 kHz |
| Io onboard | 16 DI / 16 DO |
| Comms | EtherCAT, EtherNet/IP, Modbus-TCP, Modbus-RTU, OPC UA, CANopen, RS232, RS485 x2, USB-C |
| Programming | Leadsys Studio / CODESYS V3.5 SP15; ST, LD, SFC, CFC, FBD, IL |
| Memory | 20 MB program / 40 MB data |
| Supply | 24 VDC |
| Expansion | up to 32 R2 modules |
| Ethercat slaves max | 128 |
Series ranges as published; individual models vary. The full datasheet, drawings and CAD models are available on request.
Options
- MC508CS (8 axes)
- MC516CS (16 axes)
- MC532CS (32 axes)
- R2 I/O modules
- micro SD
Typical applications
Screw lockingDispensingWeldingFillingLabellingDie-cuttingPillow packagingPrinting
Other motion controller series
Spec builder
Configure Leadshine MC500 (MC508CS / MC516CS / MC532CS)
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Step 1 of 5
Engineer support
Need Leadshine MC500 (MC508CS / MC516CS / MC532CS) or a complete system around it?
Tell us what you need, whether it is this part, an equivalent or a complete axis built around it. An engineer will review your requirements and reply, normally within one working day.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.